Opened 13 years ago

Closed 13 years ago

#1090 closed defect (duplicate)

oscam 3610 nds1 cdid:0988 LOG

Reported by: NYXG Owned by:
Priority: Please fill in Component: ! Please select...
Severity: Please fill in Keywords:
Cc: Sensitive: no

Description

2010/10/18 20:30:59 B771A990 s >> OSCam << cardserver started version 1.00-svn, build #3610 (i686-pc-linux)
2010/10/18 20:30:59 B771A990 s version=1.00-svn, build #3610, system=i686-pc-linux, nice=-1
2010/10/18 20:30:59 B771A990 s client max. idle=120 sec, debug level=255
2010/10/18 20:30:59 B771A990 s max. logsize=10 Kb
2010/10/18 20:30:59 B771A990 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/10/18 20:30:59 B771A990 s auth size=4788
2010/10/18 20:30:59 B771A990 s services reloaded: 0 services freed, 1 services loaded
2010/10/18 20:30:59 B771A990 s userdb reloaded: 0 accounts freed, 2 accounts loaded, 0 expired, 0 disabled
2010/10/18 20:30:59 B771A990 s signal handling initialized (type=sysv)
2010/10/18 20:30:59 B771A990 s can't open file "/usr/local/etc/oscam.srvid" (err=2), no service-id's loaded
2010/10/18 20:30:59 B771A990 s can't open file "/usr/local/etc/oscam.tiers" (err=2), no tier-id's loaded
2010/10/18 20:30:59 B771A990 s can't open file "/usr/local/etc/oscam.provid" (err=2), no provids's loaded
2010/10/18 20:30:59 B771A990 s can't open file "/usr/local/etc/oscam.ird" (errno=2) irdeto guessing not loaded
2010/10/18 20:30:59 B771A990 s monitor: initialized (fd=6, port=988)
2010/10/18 20:30:59 B771A990 s camd 3.3x: disabled
2010/10/18 20:30:59 B771A990 s camd 3.5x: disabled
2010/10/18 20:30:59 B771A990 s cs378x: disabled
2010/10/18 20:30:59 B771A990 s newcamd: initialized (fd=7, port=13001, crypted)
2010/10/18 20:30:59 B771A990 s CAID: 0500
2010/10/18 20:30:59 B771A990 s provid #0: FFF400
2010/10/18 20:30:59 B771A990 s provid #1: 022030
2010/10/18 20:30:59 B771A990 s provid #2: 022050
2010/10/18 20:30:59 B771A990 s provid #3: 022010
2010/10/18 20:30:59 B771A990 s provid #4: 022000
2010/10/18 20:30:59 B771A990 s newcamd: initialized (fd=8, port=11505, crypted)
2010/10/18 20:30:59 B771A990 s CAID: 0606
2010/10/18 20:30:59 B771A990 s provid #0: 000000
2010/10/18 20:30:59 B771A990 s provid #1: 000001
2010/10/18 20:30:59 B771A990 s cccam: initialized (fd=9, port=12110, crypted)
2010/10/18 20:30:59 B771A990 s radegast: disabled
2010/10/18 20:30:59 B771A990 s http thread started
2010/10/18 20:30:59 B771A990 s creating thread for device /dev/ttyUSB0 slot 0
2010/10/18 20:30:59 B771A990 s can't open file "/usr/local/etc/oscam.ac" (errno=2) anti-cascading table not loaded
2010/10/18 20:30:59 B771A990 s anticascader thread started
2010/10/18 20:30:59 B76DF280 r reader thread started (thread=B76DF280, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2010/10/18 20:30:59 B76DF280 r IFD: Opening device /dev/ttyUSB0

2010/10/18 20:30:59 B76E6280 h HTTP Server listening on port 13002
2010/10/18 20:30:59 B76DF280 r standard baudrate: cardmhz=357 mhz=357 -> effective baudrate 1200
2010/10/18 20:30:59 B76DF280 r IO: Setting properties

2010/10/18 20:30:59 B76DF280 r IO: Setting DTR=1
2010/10/18 20:30:59 B76DF280 r IO: Setting RTS=0
2010/10/18 20:30:59 B76DF280 r IO: Receiving:
2010/10/18 20:30:59 7F
2010/10/18 20:30:59 B76DF280 r IO: Receiving:
2010/10/18 20:30:59 31
2010/10/18 20:30:59 B76DF280 r IO: Receiving:
2010/10/18 20:30:59 6D
2010/10/18 20:30:59 B76DF280 r IO: Receiving:
2010/10/18 20:30:59 TIMEOUT
2010/10/18 20:30:59 B76DF280 r IO: Receiving:
TIMEOUT
2010/10/18 20:31:00 B76DF280 r IFD: Initializing reader reader-0 type=5

2010/10/18 20:31:00 B76DF280 r standard baudrate: cardmhz=357 mhz=357 -> effective baudrate 9600
2010/10/18 20:31:00 B76DF280 r IO: Setting properties

2010/10/18 20:31:00 B76DF280 r IO: Setting DTR=1
2010/10/18 20:31:00 B76DF280 r IO: Setting RTS=0
2010/10/18 20:31:00 B76DF280 r IO: Receiving:
TIMEOUT
2010/10/18 20:31:01 B76DF280 r IFD: Device /dev/ttyUSB0 succesfully opened

2010/10/18 20:31:01 B76DF280 r ct_init on /dev/ttyUSB0: 1
2010/10/18 20:31:02 B76DF280 r card detected
2010/10/18 20:31:02 B76DF280 r IFD: Activating card in reader reader-0

2010/10/18 20:31:02 B76DF280 r IFD: Resetting card:

2010/10/18 20:31:02 B76DF280 r IFD: Phoenix Setting baudrate to 9600

2010/10/18 20:31:02 B76DF280 r standard baudrate: cardmhz=357 mhz=357 -> effective baudrate 9600
2010/10/18 20:31:02 B76DF280 r IO: Setting properties

2010/10/18 20:31:02 B76DF280 r IO: Receiving:
TIMEOUT
2010/10/18 20:31:03 B76DF280 r IFD: Setting parity from Even to Even

2010/10/18 20:31:04 B76DF280 r IO: Setting RTS=1
2010/10/18 20:31:04 B76DF280 r IO: Setting RTS=0
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
03
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 01
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 37
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 5B
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 DF
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 33
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 F2
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 BF
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 69
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 00
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 AD
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 F5
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 F8
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 FF
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 FF
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 D5
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 BD
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 FF
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 FF
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:04 FF
2010/10/18 20:31:04 B76DF280 r IO: Receiving:
2010/10/18 20:31:05 TIMEOUT
2010/10/18 20:31:05 B76DF280 r TA1 = 13
2010/10/18 20:31:05 B76DF280 r FI = 01
2010/10/18 20:31:05 B76DF280 r IO: Receiving:
TIMEOUT
2010/10/18 20:31:06 B76DF280 r ATR: 3F 7F 13 25 04 33 B0 02 69 FF 4A 50 E0 00 00 54 42 00 00 00
2010/10/18 20:31:06 B76DF280 r TA1=13 TB1=25 TC1=04 no TD1 means T0
2010/10/18 20:31:06 B76DF280 r 1 protocol types detected. Historical bytes: 33 B0 02 69 FF 4A 50 E0 00 00 54 42 00 00 00
2010/10/18 20:31:06 B76DF280 r Only T0 available, selected protocol: T0, F=372, D=4.000000, N=4

2010/10/18 20:31:06 B76DF280 r IFD: Phoenix Setting baudrate to 38400

2010/10/18 20:31:06 B76DF280 r standard baudrate: cardmhz=357 mhz=357 -> effective baudrate 38400
2010/10/18 20:31:06 B76DF280 r IO: Setting properties

2010/10/18 20:31:06 B76DF280 r Setting baudrate to 38400
2010/10/18 20:31:06 B76DF280 r Setting timings: timeout=249 ms, block_delay=0 ms, char_delay=0 ms
2010/10/18 20:31:06 B76DF280 r Protocol: T=0: WWT=9600, Clockrate=3571200

2010/10/18 20:31:06 B76DF280 r IFD: Setting parity from Even to Odd

2010/10/18 20:31:06 B76DF280 r IO: Setting properties

2010/10/18 20:31:06 B76DF280 r IO: Receiving:
TIMEOUT
2010/10/18 20:31:07 B76DF280 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/10/18 20:31:07 B76DF280 r IFD: Card in reader reader-0 succesfully activated

2010/10/18 20:31:08 B76DF280 r [videoguard2-reader] passed history check
2010/10/18 20:31:08 B76DF280 r [videoguard12-reader] passed history check
2010/10/18 20:31:08 B76DF280 r [videoguard12-reader] type: VideoGuard China (0988), baseyear: 1997
2010/10/18 20:31:08 B76DF280 r [videoguard12-reader] forced to NDS1+
2010/10/18 20:31:08 B76DF280 r write to cardreader reader-0:
2010/10/18 20:31:08 48 36 01 00 01
2010/10/18 20:31:08 B76DF280 r IFD Transmit:
2010/10/18 20:31:08 48 36 01 00 01
2010/10/18 20:31:08 B76DF280 r IO: Sending:
2010/10/18 20:31:08 ED 93 7F FF 7F
2010/10/18 20:31:08 B76DF280 r IFD Transmit succesful
2010/10/18 20:31:08 B76DF280 r IO: Receiving:
ED 00 7F F8 TIMEOUT
2010/10/18 20:31:10 B76DF280 r ERROR, function call IO_Serial_Read (reader, timeout + IFD_TOWITOKO_TIMEOUT, size, buffer) returns error.
2010/10/18 20:31:10 B76DF280 r ERROR, function call Phoenix_Receive (reader, data, size, reader->read_timeout) returns error.
2010/10/18 20:31:10 B76DF280 r ERROR, function call ICC_Async_Receive (reader, 1, buffer + recv) returns error.
2010/10/18 20:31:10 B76DF280 r ERROR, function call Protocol_T0_Command (reader, command, command_len, rsp, lr) returns error.
2010/10/18 20:31:10 B76DF280 r answer from cardreader reader-0:
2010/10/18 20:31:10 B76DF280 r card system not supported
2010/10/18 20:31:10 B76DF280 r Normal mode failed, reverting to Deprecated Mode
2010/10/18 20:31:10 B76DF280 r IFD: Activating card in reader reader-0

2010/10/18 20:31:10 B76DF280 r IFD: Resetting card:

2010/10/18 20:31:10 B76DF280 r IFD: Phoenix Setting baudrate to 9600

2010/10/18 20:31:10 B76DF280 r standard baudrate: cardmhz=357 mhz=357 -> effective baudrate 9600
2010/10/18 20:31:10 B76DF280 r IO: Setting properties

2010/10/18 20:31:10 B76DF280 r IO: Receiving:
TIMEOUT
2010/10/18 20:31:11 B76DF280 r IFD: Setting parity from Odd to Even

2010/10/18 20:31:11 B76DF280 r IO: Setting properties

2010/10/18 20:31:12 B76DF280 r IO: Setting RTS=1
2010/10/18 20:31:12 B76DF280 r IO: Setting RTS=0
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
03
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 01
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 37
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 5B
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 DF
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 33
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 F2
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 BF
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 69
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 00
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 AD
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 F5
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 F8
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 FF
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 FF
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 D5
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 BD
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 FF
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 FF
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:12 FF
2010/10/18 20:31:12 B76DF280 r IO: Receiving:
2010/10/18 20:31:13 TIMEOUT
2010/10/18 20:31:13 B76DF280 r TA1 = 13
2010/10/18 20:31:13 B76DF280 r FI = 01
2010/10/18 20:31:13 B76DF280 r IO: Receiving:
TIMEOUT
2010/10/18 20:31:14 B76DF280 r ATR: 3F 7F 13 25 04 33 B0 02 69 FF 4A 50 E0 00 00 54 42 00 00 00
2010/10/18 20:31:14 B76DF280 r TA1=13 TB1=25 TC1=04 no TD1 means T0
2010/10/18 20:31:14 B76DF280 r 1 protocol types detected. Historical bytes: 33 B0 02 69 FF 4A 50 E0 00 00 54 42 00 00 00
2010/10/18 20:31:14 B76DF280 r Only T0 available, selected protocol: T0, F=372, D=4.000000, N=4

2010/10/18 20:31:14 B76DF280 r Setting timings: timeout=998 ms, block_delay=0 ms, char_delay=0 ms
2010/10/18 20:31:14 B76DF280 r Protocol: T=0: WWT=9600, Clockrate=3571200

2010/10/18 20:31:14 B76DF280 r IFD: Setting parity from Even to Odd

2010/10/18 20:31:14 B76DF280 r IO: Setting properties

2010/10/18 20:31:14 B76DF280 r IO: Receiving:
TIMEOUT
2010/10/18 20:31:15 B76DF280 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/10/18 20:31:15 B76DF280 r IFD: Card in reader reader-0 succesfully activated

2010/10/18 20:31:16 B76DF280 r [videoguard2-reader] passed history check
2010/10/18 20:31:16 B76DF280 r [videoguard12-reader] passed history check
2010/10/18 20:31:16 B76DF280 r [videoguard12-reader] type: VideoGuard China (0988), baseyear: 1997
2010/10/18 20:31:16 B76DF280 r [videoguard12-reader] forced to NDS1+
2010/10/18 20:31:16 B76DF280 r write to cardreader reader-0:
2010/10/18 20:31:16 48 36 01 00 01
2010/10/18 20:31:16 B76DF280 r IFD Transmit:
2010/10/18 20:31:16 48 36 01 00 01
2010/10/18 20:31:16 B76DF280 r IO: Sending:
2010/10/18 20:31:16 ED 93 7F FF 7F
2010/10/18 20:31:16 B76DF280 r IFD Transmit succesful
2010/10/18 20:31:16 B76DF280 r IO: Receiving:
ED 93 7F FF 7F
2010/10/18 20:31:16 B76DF280 r IO: Receiving:
2010/10/18 20:31:16 DF
2010/10/18 20:31:16 B76DF280 r IFD Received:
2010/10/18 20:31:16 04
2010/10/18 20:31:16 B76DF280 r ERROR Protocol_T0_ExchangeTPDU: Received unexpected character 04
2010/10/18 20:31:16 B76DF280 r ERROR, function call Protocol_T0_Command (reader, command, command_len, rsp, lr) returns error.
2010/10/18 20:31:16 B76DF280 r answer from cardreader reader-0:
2010/10/18 20:31:16 B76DF280 r card system not supported
2010/10/18 20:31:16 B76DF280 r card initializing error

Change History (1)

comment:1 by rebdog, 13 years ago

Resolution: duplicate
Status: newclosed

Please do NOT create a new ticket for each log, I am sure you would rather I spent time trying to get the card to work rather than closing unnecessary tickets. Please attach logs (do not post inline) to ticket 774.

Also please note there is no easy fix for this, it will take time.

Note: See TracTickets for help on using tickets.