Opened 4 years ago

Closed 3 years ago

#1765 closed defect (fixed)

Error activating card/Card initializing error D09 KDG

Reported by: starbuck Owned by:
Priority: critical Component: Card support
Severity: medium Keywords: D09, KDG, Error activating, Card initializing
Cc: Sensitive: no

Description

Revision

version=1.00-unstable_svn, build #4965, system=sh4-linux-stapi

Issue Description

Error activating card.
Card initializing error
D09 smartcard (Provider KDG Kabeldeutschland)

When the issue occurs

Oscam start

System:
IPBox 9000HD (DGS/PGI Image based on rev. #r13651)

How the issue is reproducable

<Please fill in>

<Don't forget to ATTACH (not post here) a log file of oscam in debug mode (start oscam with -d255)!>

Attachments (8)

oscam-log.txt (616.3 KB) - added by starbuck 4 years ago.
oscam.log
oscam4916_ok-log.txt (230.3 KB) - added by starbuck 4 years ago.
oscam4916 card activation OK
oscam4916_err-log.txt (230.3 KB) - added by starbuck 4 years ago.
oscam4916 card activation fails
D09.jpg (45.3 KB) - added by starbuck 4 years ago.
oscam_368_357.log (11.6 KB) - added by starbuck 4 years ago.
oscam_357_357.log (543.2 KB) - added by starbuck 4 years ago.
oscam4798_368_357.log (3.7 KB) - added by starbuck 4 years ago.
oscam4798_357_357.log (49.8 KB) - added by starbuck 4 years ago.

Download all attachments as: .zip

Change History (29)

Changed 4 years ago by starbuck

oscam.log

comment:1 follow-up: Changed 4 years ago by BurnMasterRecords

2011/04/09 18:32:33 2B0F44E8 r [nagra-reader] result not expected (6f != ab)
2011/04/09 18:32:33 2B0F44E8 r [nagra-reader] CMD$2B failed
2011/04/09 18:32:33 2B0F44E8 r [nagra-reader] NegotiateSessionKey failed

You need Card Modulus and Pairing Key to get this Card working.

comment:2 in reply to: ↑ 1 Changed 4 years ago by starbuck

Replying to BurnMasterRecords:

2011/04/09 18:32:33 2B0F44E8 r [nagra-reader] result not expected (6f != ab)
2011/04/09 18:32:33 2B0F44E8 r [nagra-reader] CMD$2B failed
2011/04/09 18:32:33 2B0F44E8 r [nagra-reader] NegotiateSessionKey failed

You need Card Modulus and Pairing Key to get this Card working.

What's the Card Modulus and Pairing Key?

I think you mean the rsakey and boxkey,or?

I have configured rsakey and boxkey correctly.

rsakey begins with eight and ends with one
boxkey begins with six and ends with b

I had problems with card initialization from the beginning also with oscam version <4965.

Sometimes I had to restart oscam 3-5 times before the card was recognized correctly.
In the past the cardreader sent a reset to the card after unsuccessful initialization, sometimes. Now with oscam version 4965 this did not happen again.

The error "result not expected (6f != ab)]" and

"CMD$2B failed" also happened before when the card was activated correctly.

I have added the "renew sessionkey before reading cw" to the reader-nagra.c from the Changeset 4807 because of freezers on some channels. Result was a decreasing of the freezers.

The code change was removed officially a few builds later. I stayed with it because of no negative issues so far.

Last edited 4 years ago by starbuck (previous) (diff)

Changed 4 years ago by starbuck

oscam4916 card activation OK

Changed 4 years ago by starbuck

oscam4916 card activation fails

comment:3 Changed 4 years ago by starbuck

Attached for reference and diagnosis please find oscam logfile oscam4916_ok-log.txt (card activation OK) and oscam4916_err-log.txt (card activation/initialization error).

I have used the same oscam configuration with #4916 and #4965.

Last edited 4 years ago by starbuck (previous) (diff)

comment:4 follow-up: Changed 4 years ago by pooyair

u might mean after changeset 4811 this problem occurred isn't it?
so if u revert that change ( add this line in latest revs

if (RENEW_SESSIONKEY()) NegotiateSessionKey(reader);

is that the problem fix?

Last edited 4 years ago by pooyair (previous) (diff)

comment:5 in reply to: ↑ 4 Changed 4 years ago by starbuck

Replying to pooyair:

u might mean after changeset 4811 this problem occurred isn't it?
so if u revert that change ( add this line in latest revs

if (RENEW_SESSIONKEY()) NegotiateSessionKey(reader);

is that the problem fix?

No the problem already occurred before that the card isn't recognized correctly first.
In some versions the recognition is better in others worse.

I have already inserted the line with "RENEW_SESSIONKEY" back into the source and I think the freezers were reduced. I have not seen any strange side effects with this piece of code so I have retained it.

It exists in both of my oscam versions #4916 and #4965. With #4916 the card gets initialized sometimes with #4965 not. No way. I don't know what the problem is. But it is a problem with card recognition (D09) in general with all oscam versions. Maybe somebody from the devs could shed some light on this...

comment:6 follow-up: Changed 4 years ago by Deas

try to start oscam in debug mode - there is a similar ticket here for another card

comment:7 in reply to: ↑ 6 Changed 4 years ago by starbuck

Replying to Deas:

try to start oscam in debug mode - there is a similar ticket here for another card

@Deas

The log-files attached above were created with oscam started with parameter -d255.

comment:8 Changed 4 years ago by starbuck

Any news regarding this issue/problem?

comment:9 Changed 4 years ago by Deas

comment:10 Changed 4 years ago by starbuck

No I think not. I have probably mixed two issues into one ticket. Sorry for that.

I think that issue

2011/04/09 18:32:33 2B0F44E8 r [nagra-reader] result not expected (6f != ab)
2011/04/09 18:32:33 2B0F44E8 r [nagra-reader] CMD$2B failed
2011/04/09 18:32:33 2B0F44E8 r [nagra-reader] NegotiateSessionKey? failed

is fixed with changeset 5133.

The main cause with the activation problem of the card still exists.

At the moment I am not sure if it is a problem with oscam or card reader driver of my IPBox.

It looks like that the reset of the card is not working properly. Timing issue?

When the card gets detected correctly the log shows:

kd card detected
ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
detect irdeto tunneled nagra card
rsa key configured -> using nagra mode
found cardsystem nagra
ROM: D N A S P 1 8 1
REV: D V R L 0 0
SER: xx xx xx xx
CAID: 1834
Prv.ID: 00 00 04 01 (sysid)
Prv.ID: 00 00 00 00
[nagra-reader] ready for requests

If it fails

kd card detected
ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
detect irdeto tunneled nagra card
rsa key configured -> using nagra mode
card system not supported
Normal mode failed, reverting to Deprecated Mode
Error activating card.

and sometimes

2011/04/09 19:51:55 2B0F44E8 r IFD: Activating card
2011/04/09 19:52:01 2B0F44E8 r ERROR, function call ioctl(reader->handle, IOCTL_SET_RESET)<0 returns error.
2011/04/09 19:52:01 2B0F44E8 r ERROR, function call Sci_Reset(reader, atr) returns error.
2011/04/09 19:52:01 2B0F44E8 r Error activating card.
2011/04/09 19:52:01 2B0F44E8 r IFD: Activating card in reader kd

Also I do not know which card type this D09 Card is exactly:
-A pure Nagra Card
-Irdeto tunneled Nagra card

Any idea what causes this?

Changed 4 years ago by starbuck

comment:11 Changed 4 years ago by Deas

there is a ticket for a card where a start of oscam with at least debug level 16 enabled makes the card work which looks like a timing issue. i know i ased this before, but with one issue fixed, please test if a delay can fix this issue.

comment:12 Changed 4 years ago by starbuck

I have searched the Trac System with different keywords but haven't found anything useful.
Next I have started oscam with debug level=16 without success. Card still gets not initialized
correctly. Deas do have some more hints?
---
Ich konnte hier im Trac System leider keinen Eintrag mit einem ähnlichen Problem mit einer Smartcard finden. Auch der Oscam Aufruf mit Debug Level = 16 brachte nicht den gewünschtem Erfolg. Die Karte wird immer noch sporad. nicht richtig initialisiert.
Deas hast Du noch einen Vorschlag / Hinweis für mich?

Last edited 4 years ago by starbuck (previous) (diff)

comment:13 Changed 4 years ago by BurnMasterRecords

It's a Nagra Card with deactivated BetaCrypt? Header, so forget what OScam says :-)

Use:

mhz = 368
cardmhz = 357

Note: my Card works with 6.00MHZ in DM800 but with this settings i get better ECM Times.

Maybe this solve this Problem too, but i think it's an issue of the Internal Reader of your Receiver.

Changed 4 years ago by starbuck

comment:14 Changed 4 years ago by starbuck

I have used the above mentioned settings without luck.

Now the reader cant get the ROM version of the Smartcard ->get rom version failed

My Card has ROM Version 181.

2011/05/01 12:52:29 2B0F44E8 r IFD: Activating card in reader kd

2011/05/01 12:52:29 2B0F44E8 r IFD: Activating card
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 3B
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 9F
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 21
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 0E
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 49
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 52
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 44
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 45
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 54
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 4F
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 20
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 41
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 43
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 53
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 03
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 84
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 55
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 FF
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 80
2011/05/01 12:52:32 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:32 2B0F44E8 6D
2011/05/01 12:52:33 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:33 2B0F44E8 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2011/05/01 12:52:33 2B0F44E8 r TA1=21 TD1=0E (T14)
2011/05/01 12:52:33 2B0F44E8 r 1 protocol types detected. Historical bytes: 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80
2011/05/01 12:52:33 2B0F44E8 r No PTS needed, selected protocol T14, F=558, D=1.000000, N=0

2011/05/01 12:52:33 2B0F44E8 r Setting timings: timeout=484 ms, block_delay=0 ms, char_delay=0 ms
2011/05/01 12:52:33 2B0F44E8 r Protocol: T=14: WWT=4800, Clockrate=3571200

2011/05/01 12:52:34 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:34 2B0F44E8 r Setting T=14 fs=3 mhz ETU=625 WWT=4800 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=5 I=50 U=0
2011/05/01 12:52:34 2B0F44E8 r Maximum frequency for this card is formally 6 Mhz, clocking it to 3.68 Mhz
2011/05/01 12:52:34 2B0F44E8 r IFD: Card in reader kd succesfully activated

2011/05/01 12:52:35 2B0F44E8 r detect irdeto tunneled nagra card
2011/05/01 12:52:35 2B0F44E8 r rsa key configured -> using nagra mode
2011/05/01 12:52:35 2B0F44E8 r write to cardreader kd:
2011/05/01 12:52:35 2B0F44E8 A0 CA 00 00 03 10 00 11
2011/05/01 12:52:35 2B0F44E8 r IFD Transmit:
2011/05/01 12:52:35 2B0F44E8 01 A0 CA 00 00 03 10 00 11 56
2011/05/01 12:52:35 2B0F44E8 r IO: Sending:
2011/05/01 12:52:35 2B0F44E8 01 A0 CA 00 00 03 10 00 11 56
2011/05/01 12:52:35 2B0F44E8 r IFD Transmit succesful
2011/05/01 12:52:37 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:37 2B0F44E8 r ERROR, function call IO_Serial_Read (reader, timeout + IFD_TOWITOKO_TIMEOUT, size, buffer) returns error.
2011/05/01 12:52:37 2B0F44E8 r ERROR, function call Phoenix_Receive (reader, data, size, reader->read_timeout) returns error.
2011/05/01 12:52:37 2B0F44E8 r ERROR, function call ICC_Async_Receive (reader, 8, buffer) returns error.
2011/05/01 12:52:37 2B0F44E8 r IFD Transmit:
2011/05/01 12:52:37 2B0F44E8 01 A0 CA 00 00 03 10 00 11 56
2011/05/01 12:52:38 2B0F44E8 r IO: Sending:
2011/05/01 12:52:38 2B0F44E8 01 A0 CA 00 00 03 10 00 11 56
2011/05/01 12:52:38 2B0F44E8 r IFD Transmit succesful
2011/05/01 12:52:40 2B0F44E8 r IO: Receiving:
2011/05/01 12:52:40 2B0F44E8 r ERROR, function call IO_Serial_Read (reader, timeout + IFD_TOWITOKO_TIMEOUT, size, buffer) returns error.
2011/05/01 12:52:40 2B0F44E8 r ERROR, function call Phoenix_Receive (reader, data, size, reader->read_timeout) returns error.
2011/05/01 12:52:40 2B0F44E8 r ERROR, function call ICC_Async_Receive (reader, 8, buffer) returns error.
2011/05/01 12:52:40 2B0F44E8 r ERROR, function call Protocol_T0_Command returns error.
2011/05/01 12:52:40 2B0F44E8 r [nagra-reader] get rom version failed
2011/05/01 12:52:40 2B0F44E8 r [videoguard2-reader] failed history check
2011/05/01 12:52:40 2B0F44E8 r [videoguard12-reader] failed history check
2011/05/01 12:52:40 2B0F44E8 r card system not supported

Complete log oscam_368_357.log is attached

Last edited 4 years ago by starbuck (previous) (diff)

comment:15 Changed 4 years ago by starbuck

Now I have experimented with these values:

mhz = 357
cardmhz = 357

Card is now detected properly at first.

But there are some other errors after card detection.

2011/05/01 13:18:28 2B0F44E8 r [nagra-reader] using camid FF FF FF FF  for dt08 calc
2011/05/01 13:18:28 2B0F44E8 r [nagra-reader] DT08 signature check nok
2011/05/01 13:18:28 2B0F44E8 r [nagra-reader] CAMDATA Done


2011/05/01 13:18:36 2B0F44E8 r [nagra-reader] Camstate: 01 00 20 
2011/05/01 13:18:36 2B0F44E8 r reader: kd ecm: E842 real time: 2276 ms
2011/05/01 13:18:36 2B8F44E8 c ncd_send_dcw: er->cpti=0, cl_msgid=129, 81
2011/05/01 13:18:36 2B8F44E8 c send 15 bytes to client
2011/05/01 13:18:36 2B8F44E8   00 0D 00 81 00 00 00 00 00 00 00 00 81 00 00 
2011/05/01 13:18:36 2B8F44E8 c pgi (1834&000000/C3BA/89:E842): not found (2285 ms) by kd (of 1 avail 1) - SciFi (KD)

2011/05/01 13:18:41 2B0F44E8 r IFD Transmit: 
2011/05/01 13:18:41 2B0F44E8   01 A0 CA 00 00 43 2B 40 1D 51 F4 99 8A 06 CA B8 
2011/05/01 13:18:41 2B0F44E8   9E EC 7D 87 A6 6C A2 B1 E5 28 39 C6 B6 6B 72 CF 
2011/05/01 13:18:41 2B0F44E8   A4 F5 36 06 DD DC 2F 6D E2 2B 12 A6 B9 E7 AA 7A 
2011/05/01 13:18:41 2B0F44E8   EF 9A A0 00 CC 26 A8 C8 2B 04 69 8A 86 D9 2A E1 
2011/05/01 13:18:41 2B0F44E8   CE FE F8 B2 3E F2 11 52 02 81 
2011/05/01 13:18:42 2B0F44E8 r ERROR in IO_Serial_Write u=0 to_send=74 (errno=25 Inappropriate ioctl for device)
2011/05/01 13:18:42 2B0F44E8 r ERROR, function call IO_Serial_Write (reader, char_delay, to_send, buffer+sent) returns error.
2011/05/01 13:18:42 2B0F44E8 r ERROR, function call Phoenix_Transmit (reader, sent, size, 0, 0) returns error.
2011/05/01 13:18:42 2B0F44E8 r ERROR, function call ICC_Async_Transmit (reader, cmd_len+2, buffer) returns error.
2011/05/01 13:18:42 2B0F44E8 r IFD Transmit: 
2011/05/01 13:18:42 2B0F44E8   01 A0 CA 00 00 43 2B 40 1D 51 F4 99 8A 06 CA B8 
2011/05/01 13:18:42 2B0F44E8   9E EC 7D 87 A6 6C A2 B1 E5 28 39 C6 B6 6B 72 CF 
2011/05/01 13:18:42 2B0F44E8   A4 F5 36 06 DD DC 2F 6D E2 2B 12 A6 B9 E7 AA 7A 
2011/05/01 13:18:42 2B0F44E8   EF 9A A0 00 CC 26 A8 C8 2B 04 69 8A 86 D9 2A E1 
2011/05/01 13:18:42 2B0F44E8   CE FE F8 B2 3E F2 11 52 02 81 
2011/05/01 13:18:43 2B0F44E8 r ERROR in IO_Serial_Write u=0 to_send=74 (errno=25 Inappropriate ioctl for device)
2011/05/01 13:18:43 2B0F44E8 r ERROR, function call IO_Serial_Write (reader, char_delay, to_send, buffer+sent) returns error.
2011/05/01 13:18:43 2B0F44E8 r ERROR, function call Phoenix_Transmit (reader, sent, size, 0, 0) returns error.
2011/05/01 13:18:43 2B0F44E8 r ERROR, function call ICC_Async_Transmit (reader, cmd_len+2, buffer) returns error.
2011/05/01 13:18:43 2B0F44E8 r ERROR, function call Protocol_T0_Command returns error.
2011/05/01 13:18:43 2B0F44E8 r [nagra-reader] CMD$2B failed
2011/05/01 13:18:43 2B0F44E8 r reader: kd ecm: 3AF2 real time: 3730 ms
2011/05/01 13:18:43 2B0F44E8 r write to cardreader kd:
2011/05/01 13:18:43 2B8F44E8 c ncd_send_dcw: er->cpti=0, cl_msgid=132, 80
2011/05/01 13:18:43 2B8F44E8 c send 15 bytes to client
2011/05/01 13:18:43 2B8F44E8   00 0D 00 84 00 00 00 00 00 00 00 00 80 00 00 
2011/05/01 13:18:43 2B0F44E8   A0 CA 00 00 03 C0 00 06 
2011/05/01 13:18:43 2B0F44E8 r IFD Transmit: 
2011/05/01 13:18:43 2B0F44E8   01 A0 CA 00 00 03 C0 00 06 91 
2011/05/01 13:18:43 2B8F44E8 c pgi (1834&000000/C3BA/89:3AF2): not found (3739 ms) by kd (of 1 avail 1) - SciFi (KD)

Why did the signature check fail?

Are the following errors consequential errors?

What's wrong here?

Full oscam_357_357.log attached.

Changed 4 years ago by starbuck

comment:16 Changed 4 years ago by Admin

The "Inappropriate ioctl for device" message seems strange. Is this the internal reader? Maybe this receiver has bugs/missing function calls in its driver or we need some special ioctls for it.

comment:17 Changed 4 years ago by starbuck

Yes it's the internal cardreader of the IPBox 9000HD. Outside the EU the receiver is also known as Cuberevo HD.

comment:18 Changed 4 years ago by BurnMasterRecords

Maybe if you use a new version after 5126 ?
The is some Bug!
U should use some older version!

comment:19 Changed 4 years ago by starbuck

Using oscam #4897 with mhz = 357 and cardmhz = 357

2011/05/01 15:45:21 2B1A04E8 r [nagra-reader] using camid FF FF FF FF  for dt08 calc
2011/05/01 15:45:21 2B1A04E8 r [nagra-reader] DT08 signature check nok
2011/05/01 15:45:21 2B1A04E8 r [nagra-reader] CAMDATA Done

2011/05/01 15:45:26 2B1A04E8 r [nagra-reader] result not expected (6f != ab)
2011/05/01 15:45:26 2B1A04E8 r [nagra-reader] CMD$2B failed
2011/05/01 15:45:26 2B1A04E8 r [nagra-reader] NegotiateSessionKey failed
2011/05/01 15:45:26 2B1A04E8 r detect irdeto card
2011/05/01 15:45:26 2B1A04E8 r [irdeto-reader] using camkey data from config
2011/05/01 15:45:26 2B1A04E8 r [irdeto-reader]      camkey: 66xxxxxxxxxxxx7B
2011/05/01 15:45:26 2B1A04E8 r [irdeto-reader] camkey-data: 8Axxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx55
2011/05/01 15:45:26 2B1A04E8 r [irdeto-reader] camkey-data: 19xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx11
2011/05/01 15:45:26 2B1A04E8 r write to cardreader kd:
2011/05/01 15:45:26 2B1A04E8   02 02 03 00 00 
2011/05/01 15:45:26 2B1A04E8 r IFD Transmit: 
2011/05/01 15:45:26 2B1A04E8   01 02 02 03 00 00 3D 
2011/05/01 15:45:27 2B1A04E8 r IO: Sending: 
2011/05/01 15:45:27 2B1A04E8   01 02 02 03 00 00 3D 
2011/05/01 15:45:27 2B1A04E8 r IFD Transmit succesful
2011/05/01 15:45:28 2B1A04E8 r IO: Receiving:
2011/05/01 15:45:28 2B1A04E8 r ERROR, function call IO_Serial_Read (reader, timeout + IFD_TOWITOKO_TIMEOUT, size, buffer) returns error.
2011/05/01 15:45:28 2B1A04E8 r ERROR, function call Phoenix_Receive (reader, data, size, reader->read_timeout) returns error.
2011/05/01 15:45:28 2B1A04E8 r ERROR, function call ICC_Async_Receive (reader, 8, buffer) returns error.

2011/05/01 15:45:31 2B1A04E8 r IO: Receiving:
2011/05/01 15:45:31 2B1A04E8 r ERROR, function call IO_Serial_Read (reader, timeout + IFD_TOWITOKO_TIMEOUT, size, buffer) returns error.
2011/05/01 15:45:31 2B1A04E8 r ERROR, function call Phoenix_Receive (reader, data, size, reader->read_timeout) returns error.
2011/05/01 15:45:31 2B1A04E8 r ERROR, function call ICC_Async_Receive (reader, 8, buffer) returns error.
2011/05/01 15:45:31 2B1A04E8 r ERROR, function call Protocol_T0_Command returns error.
2011/05/01 15:45:31 2B1A04E8 r [videoguard2-reader] failed history check
2011/05/01 15:45:31 2B1A04E8 r [videoguard12-reader] failed history check
2011/05/01 15:45:31 2B1A04E8 r card system not supported
2011/05/01 15:45:31 2B1A04E8 r Normal mode failed, reverting to Deprecated Mode
2011/05/01 15:45:31 2B1A04E8 r IFD: Activating card in reader kd

2011/05/01 15:45:31 2B1A04E8 r IFD: Activating card
2011/05/01 15:45:36 2B1A04E8 r ERROR, function call ioctl(reader->handle, IOCTL_SET_RESET)<0 returns error.
2011/05/01 15:45:36 2B1A04E8 r ERROR, function call Sci_Reset(reader, atr) returns error.
2011/05/01 15:45:36 2B1A04E8 r Error activating card.
2011/05/01 15:45:37 2B1A04E8 r IFD: Activating card in reader kd

Using oscam #4897 with mhz = 368 and cardmhz = 357

2011/05/01 16:06:05 2B1A04E8 r IFD: Activating card
2011/05/01 16:06:11 2B1A04E8 r ERROR, function call ioctl(reader->handle, IOCTL_SET_RESET)<0 returns error.
2011/05/01 16:06:11 2B1A04E8 r ERROR, function call Sci_Reset(reader, atr) returns error.
2011/05/01 16:06:11 2B1A04E8 r Error activating card.
2011/05/01 16:06:11 2B1A04E8 r IFD: Activating card in reader kd

Full logs oscam4798_368_357.log and oscam4798_357_357.log attached.

Changed 4 years ago by starbuck

Changed 4 years ago by starbuck

comment:20 Changed 4 years ago by Deas

can you test this card in a external usb reader also? if possible NOT a smargo - some standard ftdi reader.

comment:21 Changed 3 years ago by Deas

  • Resolution set to fixed
  • Status changed from new to closed

no update for 7 months => closed...

Note: See TracTickets for help on using tickets.