Opened 13 years ago
Closed 13 years ago
#1993 closed defect (invalid)
Clients via newcamd (N lines) not connecting to new revision of oscam
Reported by: | xfiles_2007 | Owned by: | |
---|---|---|---|
Priority: | critical | Component: | Protocol - Newcamd |
Severity: | high | Keywords: | |
Cc: | Sensitive: | no |
Description
Revision
5544
Issue Description
Clients via newcamd/cccam not connecting to new revision of oscam (Ubuntu 11.04 PC system). Packets seem to be getting lost.
When the issue occurs
How the issue is reproducable
- Compile the new revision of Oscam in Ubuntu 11.04
- Setup the config files.
- Test the connection from any reciever to the Oscam server and notice that no connections occur.
Change History (14)
comment:1 by , 13 years ago
Component: | Please fill in → Protocol - Newcamd |
---|---|
Priority: | Please fill in → critical |
Severity: | Please fill in → high |
comment:2 by , 13 years ago
comment:3 by , 13 years ago
Resolution: | → invalid |
---|---|
Status: | new → closed |
no log => closed.
btw.: i have a few mgcamd clients with newcamd connected to my server. and they all work with the latest version. so i´m sure this is a config issue on your side. oscam does not loose packets - faulty network hardware or overloaded hub´s can loose packets.
discuss this in the forum first. this is a ticket system for confirmed bugs!
comment:4 by , 13 years ago
Resolution: | invalid |
---|---|
Status: | closed → reopened |
@xfiles_2007
did some change in r5545
please test with latest rev,
comment:5 by , 13 years ago
stable v v 1.0 is fine with the Exact same config . I will check the latest and report tonite .I don't believe it's a network routing issue since the stable version is fine.
comment:6 by , 13 years ago
@Deas
no log => closed
we have 3 tickets #1959 , #1981 , #1993 in this case , so i think should be more patient on tickets , sometimes nothing would written in log, so logs always could not helps .
Best Regards
@xfiles_2007
if log could not provided by u , u could determine which rev this starts. (since devs not have all hardwares ,.. to reproduce it ) there are only 4 revs u might check which is before newcamd change sets . to figure out which rev is last working so please test these :
comment:7 by , 13 years ago
comment:8 by , 13 years ago
Latest rev doesnt work ..same issue on Ubuntu 11.04 , pc installation.
Not sure if the below will help.
Rev 5554
Warning: keyword 'build' in cccam section not recognized
2011/07/06 7:42:24 B77326C0 s >> OSCam << cardserver started, version 1.00-unstable_svn, build #5554 (i686-pc-linux)
2011/07/06 7:42:24 B77326C0 s version=1.00-unstable_svn, build #5554, system=i686-pc-linux, nice=-1
2011/07/06 7:42:24 B77326C0 s client max. idle=120 sec, debug level=0
2011/07/06 7:42:24 B77326C0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2011/07/06 7:42:24 B77326C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/07/06 7:42:24 B77326C0 s Cannot open file "config/oscam.services" (errno=2 No such file or directory)
Warning: keyword 'cachedelay' in reader section not recognized
Warning: keyword 'cachedelay' in reader section not recognized
Warning: keyword 'cachedelay' in reader section not recognized
Warning: keyword 'cachedelay' in reader section not recognized
Warning: keyword 'cachedelay' in reader section not recognized
2011/07/06 7:42:24 B77326C0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/07/06 7:42:24 B77326C0 s signal handling initialized (type=sysv)
2011/07/06 7:42:24 B77326C0 s 1072 service-id's loaded in 10ms
2011/07/06 7:42:24 B77326C0 s can't open file "config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/07/06 7:42:24 B77326C0 s 6 provid's loaded
2011/07/06 7:42:24 B77326C0 s can't open file "config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/07/06 7:42:24 B77326C0 s monitor: disabled
2011/07/06 7:42:24 B77326C0 s camd33: disabled
2011/07/06 7:42:24 B77326C0 s camd35: disabled
2011/07/06 7:42:24 B77326C0 s cs378x: disabled
2011/07/06 7:42:24 B77326C0 s newcamd: initialized (fd=6, port=4401, crypted)
2011/07/06 7:42:24 B77326C0 s CAID: 0604
2011/07/06 7:42:24 B77326C0 s provid #0: 000000
2011/07/06 7:42:24 B77326C0 s cccam: initialized (fd=7, port=45418, crypted)
2011/07/06 7:42:24 B77326C0 s radegast: disabled
2011/07/06 7:42:24 B77326C0 s http thread started
2011/07/06 7:42:24 B77326C0 s creating thread for device /dev/ttyUSB0
comment:10 by , 13 years ago
Ok well :
5204 same issue , doesnt work
5225 same issue, doesnt work
5000 same issue, doesnt work
4500 same issue, doesnt work
4000 WORKS!!!!!
so there has been a problem somewhere and im suprised no one has picked it up ??
Warning: keyword 'build' in cccam section not recognized
2011/07/06 8:11:48 B77AD6C0 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4000 (i686-pc-linux)
2011/07/06 8:11:48 B77AD6C0 s version=1.00-unstable_svn, build #4000, system=i686-pc-linux, nice=-1
2011/07/06 8:11:48 B77AD6C0 s client max. idle=120 sec, debug level=0
2011/07/06 8:11:48 B77AD6C0 s max. logsize=unlimited
2011/07/06 8:11:48 B77AD6C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/07/06 8:11:48 B77AD6C0 s auth size=4788
2011/07/06 8:11:48 B77AD6C0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2)
Warning: keyword 'cachedelay' in reader section not recognized
Warning: keyword 'cachedelay' in reader section not recognized
Warning: keyword 'cachedelay' in reader section not recognized
Warning: keyword 'cachedelay' in reader section not recognized
Warning: keyword 'cachedelay' in reader section not recognized
2011/07/06 8:11:48 B77AD6C0 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/07/06 8:11:48 B77AD6C0 s signal handling initialized (type=sysv)
2011/07/06 8:11:48 B77AD6C0 s 1072 service-id's loaded
2011/07/06 8:11:48 B77AD6C0 s can't open file "/usr/local/etc/oscam.tiers" (err=2), no tier-id's loaded
2011/07/06 8:11:48 B77AD6C0 s 6 provid's loaded
2011/07/06 8:11:48 B77AD6C0 s can't open file "/usr/local/etc/oscam.ird" (errno=2) irdeto guessing not loaded
2011/07/06 8:11:48 B77AD6C0 s monitor: disabled
2011/07/06 8:11:48 B77AD6C0 s camd33: disabled
2011/07/06 8:11:48 B77AD6C0 s camd35: disabled
2011/07/06 8:11:48 B77AD6C0 s cs378x: disabled
2011/07/06 8:11:48 B77AD6C0 s newcamd: initialized (fd=5, port=4401, crypted)
2011/07/06 8:11:48 B77AD6C0 s CAID: 0604
2011/07/06 8:11:48 B77AD6C0 s provid #0: 000000
2011/07/06 8:11:48 B77AD6C0 s cccam: initialized (fd=6, port=45418, crypted)
2011/07/06 8:11:48 B77AD6C0 s radegast: disabled
2011/07/06 8:11:48 B77AD6C0 s http thread started
2011/07/06 8:11:48 B77AD6C0 s creating thread for device /dev/ttyUSB0 slot 0
2011/07/06 8:11:48 B77AD6C0 s creating thread for device /dev/ttyUSB1 slot 0
2011/07/06 8:11:48 B77AD6C0 s creating thread for device /dev/ttyUSB2 slot 0
2011/07/06 8:11:48 B77AD6C0 s creating thread for device /dev/ttyUSB3 slot 0
2011/07/06 8:11:48 B77AD6C0 s creating thread for device /dev/ttyUSB4 slot 0
2011/07/06 8:11:48 B77AD6C0 s waiting for local card init
2011/07/06 8:11:48 B6777B70 r reader thread started (thread=B6777B70, label=red3, device=/dev/ttyUSB2, detect=cd, mhz=600, cardmhz=600)
2011/07/06 8:11:48 B6777B70 r ERROR opening device /dev/ttyUSB2
2011/07/06 8:11:48 B6777B70 r Cannot open device: /dev/ttyUSB2
2011/07/06 8:11:48 B5F76B70 r reader thread started (thread=B5F76B70, label=red4, device=/dev/ttyUSB3, detect=cd, mhz=600, cardmhz=600)
2011/07/06 8:11:48 B5F76B70 r ERROR opening device /dev/ttyUSB3
2011/07/06 8:11:48 B5F76B70 r Cannot open device: /dev/ttyUSB3
2011/07/06 8:11:48 B5775B70 r reader thread started (thread=B5775B70, label=red5, device=/dev/ttyUSB4, detect=cd, mhz=600, cardmhz=600)
2011/07/06 8:11:48 B5775B70 r ERROR opening device /dev/ttyUSB4
2011/07/06 8:11:48 B5775B70 r Cannot open device: /dev/ttyUSB4
2011/07/06 8:11:48 B6F78B70 r reader thread started (thread=B6F78B70, label=red2, device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=600)
2011/07/06 8:11:48 B6F78B70 r ERROR opening device /dev/ttyUSB1
2011/07/06 8:11:48 B6F78B70 r Cannot open device: /dev/ttyUSB1
2011/07/06 8:11:48 B7779B70 r reader thread started (thread=B7779B70, label=red1, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2011/07/06 8:11:48 B7779B70 r ERROR opening device /dev/ttyUSB0
2011/07/06 8:11:48 B7779B70 r Cannot open device: /dev/ttyUSB0
2011/07/06 8:11:48 B77BC280 h HTTP Server listening on port 8123
2011/07/06 8:11:51 B77AD6C0 s init for all local cards done
2011/07/06 8:11:51 B77AD6C0 s anti cascading disabled
2011/07/06 8:11:51 B77B5280 c client connected to 4401 port
2011/07/06 8:11:51 B77B5280 c encrypted newcamd:4401-client 192.168.11.9 granted (test1234, au=red1)
2011/07/06 8:11:51 B77B5280 c user test1234 authenticated successfully (CCcam)
2011/07/06 8:11:51 B77B5280 c AU wont be used on this port -> disable AU
2011/07/06 8:11:58 B77B5280 c Connection closed to client
2011/07/06 8:11:58 B77B5280 c test1234 disconnected from 192.168.11.9
2011/07/06 8:11:58 B77B5280 c thread B77B5280 ended!
2011/07/06 8:11:58 B4F74280 c client connected to 4401 port
2011/07/06 8:11:58 B4F74280 c encrypted newcamd:4401-client 192.168.11.9 granted (test1234, au=red1)
2011/07/06 8:11:58 B4F74280 c user test1234 authenticated successfully (CCcam)
2011/07/06 8:11:58 B4F74280 c AU wont be used on this port -> disable AU
2011/07/06 8:12:06 B77B5280 c client connected to 4401 port
2011/07/06 8:12:06 B77B5280 c client(B77B5280) duplicate user 'test1234' from 192.168.11.9 set to fake (uniq=1)
2011/07/06 8:12:06 B77B5280 c encrypted newcamd:4401-client 192.168.11.9 granted (test1234, au(auto)=0)
2011/07/06 8:12:06 B77B5280 c user test1234 authenticated successfully (CCcam)
2011/07/06 8:12:06 B77B5280 c AU disabled for user test1234
C2011/07/06 8:12:11 B77AD6C0 s exit with signal 2
2011/07/06 8:12:11 B77AD6C0 s cardserver down
comment:11 by , 13 years ago
@xfiles_2007
- are u blind? before u post these useless log lareq78 said he is suspicious to r5205 , is that really hard for u to test one revision , then how u could expect another guy take time for helping u ...
5000 same issue, doesnt work 4500 same issue, doesnt work
- don't be surprised , devs here does not have all protocol , hardware . sure if ie lareq78 has newcamd protocol , he would reproduce and test it himself . so he is too nice that want to help u about something that he doesn't use .
comment:12 by , 13 years ago
@pooyair
- are you blind ?? i wrote that r5204 doesnt work , which is what he asked me to check.
- Well for me the revisions i posted above dont work - r4000 seems to be the only one as per my posts above.
- yup i am gladful for all his help and he is nice - i cant believe how rude you are though - i am just reporting my issue and the tests ive done.
comment:13 by , 13 years ago
can we PLEASE switch this discussion to the streamboard forum (e.g.: http://www.streamboard.tv/wbb2/board.php?boardid=235)? trac is for trouble tickets and NOT the right place for a long discussion. so far we have nearly no information that could help to find the reason and we also don´t know your config and what clients you have that cause this problem.
so please open a thread in forum and try to present your config as detailed as possible. thank´s!
comment:14 by , 13 years ago
Resolution: | → invalid |
---|---|
Status: | reopened → closed |
open a thread in forum for discuss and of course post your config!
which rev this problem starts? (which one is last working?)