Timeline



Oct 3, 2010:

11:55 PM Changeset [3364] by schlocke
cccam: changed UA format cccam: updateded Partner detection
9:46 PM Changeset [3363] by dingo35
module.*: Introduce client param get_dcw, send_dcw
9:24 PM Ticket #987 (build #3362) closed by alno
invalid: RTFM + put the oscam.tiers file in the config path if needed
9:16 PM Ticket #987 (build #3362) created by pateras
Dear all on oscam build build #3362 have oscam.tiers failure please …
8:39 PM Changeset [3362] by dingo35
module.*: Introduce client parameter, eliminating cs_idx looping
7:44 PM Changeset [3361] by dingo35
oscam.c Remove unused wait4master
7:34 PM Ticket #986 (Sky It Detecting card 0919 failed with new and old oscam) created by Dexter1983
Since 2 or 3 days i noticed that after rebooting my dm800hd …
6:48 PM Changeset [3360] by rorothetroll
ifd_smartreader.c: some code cleanup
6:48 PM Ticket #979 (DVBAPI not compiled) closed by Bruty
fixed: fixed at 3358.…
6:44 PM Changeset [3359] by rorothetroll
ifd_smartreader.c : check for a fixed freq of 368 and set the smargo …
6:23 PM Changeset [3358] by _network
compile with dvbapi support when -DTUXBOX is set
5:53 PM Ticket #985 (Oscam crash after allot of invalid header lengths) created by AciDCooL
Using Oscam as CCcam replacement. Around 30 readers and users. Since …
4:39 PM Ticket #984 (DVBAPI Process not running) closed by Bruty
duplicate: see ticket #979
4:36 PM Ticket #984 (DVBAPI Process not running) created by zackmuc
Since build 3352 the dvbapi process is not running anymore
4:20 PM Changeset [3357] by rebdog
add macro D_USE, if WITH_DUBUG is defined warns if variable is not …
3:56 PM Changeset [3356] by dingo35
oscam.c Integrate send_restart_cardreader and restart_cardreader …
3:27 PM Changeset [3355] by dingo35
globals.h remove client->cidx since it is silly to store index of …
3:23 PM Ticket #982 (Strange behavior on armv5tel (QNAP-TS219P)) reopened by picea
it had the right time, or what do you mean with set the right time?
3:18 PM Ticket #982 (Strange behavior on armv5tel (QNAP-TS219P)) closed by alno
invalid
3:06 PM Ticket #983 (CMake Error: Error in cmake code) created by kolman
Compiling new oscam i have this eror: Checked out revision 3354. -- …
3:04 PM Ticket #982 (Strange behavior on armv5tel (QNAP-TS219P)) created by picea
Hi, i successfully compiled oscam rev. 3353 on armv5tel. But in the …
2:55 PM Changeset [3354] by rebdog
compile error fixes
2:53 PM Ticket #846 (sky caid 09c4 since 3033 not readable anymore after restart) reopened by ChristianR1
"your are not using original oscam." what do you want to say?!?
2:31 PM Ticket #846 (sky caid 09c4 since 3033 not readable anymore after restart) closed by _network
wontfix: oscam is not able to automaticlly insert anything into your config …
12:26 PM Ticket #981 (DVBAPI not working in 3353) closed by Bruty
duplicate
12:16 PM Ticket #981 (DVBAPI not working in 3353) created by theparasol
DVBAPI isn't working in mipsel build 3353, please fix! …
11:59 AM Ticket #980 (Segmentation fault on dm500 since build #3103) created by pannel
Hi everybody Since this build on my dm500 I have a segmentation fault …
11:29 AM Ticket #979 (DVBAPI not compiled) created by Bruty
From 3348 not automatically compiled DVBAPI....Tested compiled mips …
11:18 AM Ticket #978 (failed to read UM01/UM02/UM03 Smartcards in DB7025+ internal SC-Reader) created by kellerkind
since ca. Oscam Version 960, the nagra-reader.c for Unitymedia …
11:14 AM Changeset [3353] by _network
fix compile error
10:54 AM Ticket #977 (HTTP crashing bug) created by FilipeAmadeuO
in the 3348 version i get a http crashing bug. In the -d255 log i get: …
10:52 AM Ticket #976 (CCcam users banned because of bad account detection) created by FilipeAmadeuO
Sometimes i have like 7 clients banned at the start... It bans all the …
10:49 AM Ticket #975 ([3350] config.sh - configuration not saved) closed by _network
fixed: fixed with r3352
10:45 AM Changeset [3352] by _network
fix #975
10:44 AM Changeset [3351] by lattjo
Let's not put everything in globals.h
10:38 AM Ticket #975 ([3350] config.sh - configuration not saved) created by faccione
config.sh is not saving the configuration. Addons data remains …
10:30 AM Changeset [3350] by lattjo
Cleanup of module config.
10:23 AM Changeset [3349] by lattjo
Reader specific code does not have to be globally visible anymore.
10:16 AM Ticket #846 (sky caid 09c4 since 3033 not readable anymore after restart) reopened by ChristianR1
Hi, thanks rebdog for fixing this error but some version after your …
1:53 AM Ticket #974 (no orf 0d95 cryptoworks emms more? and hrt 0500:030a00 viaccess 3 also.) created by gabberhead
this is the log with the newest build: 010/10/03 1:46:50 708 c05 …

Oct 2, 2010:

10:15 PM Changeset [3348] by _network
fix for last commit
10:04 PM Changeset [3347] by _network
make reader-irdeto threadsafe
8:17 PM Changeset [3346] by rorothetroll
try to fix viaccess emm on some card. I commented the set provider …
8:11 PM Ticket #971 (Missing feature: Close a single user/connection) closed by alno
fixed: reimplemented in head
8:11 PM Changeset [3345] by alno
WebIf: reaktivate kill clients and restart readers from statusview
7:40 PM Ticket #973 (DVBAPI PID error since 3316 (variable problem!) please fix :)) created by theparasol
No audio on NED1 / all SD channels of canaldigitaal Reverting back to …
7:19 PM Ticket #972 (SVN 3342 - Multiple CCcam connection from a single host remains persistent) created by faccione
If a client/host connects multiple times using the same …
7:13 PM Ticket #971 (Missing feature: Close a single user/connection) created by faccione
In the previous version, when Oscam was managing a single PID per …
6:57 PM Ticket #966 (now shutdown not works for remot control, oscam monitor) reopened by nkanga
svn3344, no longer works, use the source code from svn3089
5:35 PM Ticket #970 (/tmp/.pauseoscam does not work, and oscam stop running when reciver ...) created by zildan
"Create file /tmp/.pauseoscam to pause DVB API, e.g. if STB goes …
5:00 PM Ticket #966 (now shutdown not works for remot control, oscam monitor) closed by alno
fixed: check head
5:00 PM Changeset [3344] by alno
change exit method in monitor modul
4:57 PM Ticket #968 (openpli dm800 mipsel oscam build >3316 canaldigitaal card) closed by theparasol
fixed: Mipsel build 3343: everything functions again :)
4:40 PM Ticket #969 (bug variant CMD 05) created by rosko
after almost 180 minutes of connecting to a server cccam 2.1.4 oscam …
3:58 PM Ticket #968 (openpli dm800 mipsel oscam build >3316 canaldigitaal card) created by theparasol
oscam build 3303 was the latest build where my canaldigitaal card …
3:39 PM Changeset [3343] by _network
fix udp server (first request was always dropped)
2:12 PM Ticket #966 (now shutdown not works for remot control, oscam monitor) reopened by nkanga
now works, but it does not send the message, server down as before
10:23 AM Ticket #966 (now shutdown not works for remot control, oscam monitor) closed by alno
fixed: Plese check head Revision
10:23 AM Changeset [3342] by alno
fix for shutdown via monitorport Ticket #966
10:03 AM Changeset [3341] by schlocke
cccam: changed locking behaviour
7:29 AM Ticket #967 (Oscan 3339 crash after " no suitable card on server (auto blocked)") created by trifolo6969
After this Oscam crash, only 4 reader cccam and no other. Now i try to …
5:55 AM Changeset [3340] by rorothetroll
fix an error message in viaccess ecm

Oct 1, 2010:

11:02 PM Changeset [3339] by schlocke
cccam: reverted Gorlan.NG change for rekursive locks. Recursive looks …
10:47 PM CardsList edited by downunder
added YOUSEE / TDC - Cable ( DK ) (diff)
10:42 PM Changeset [3338] by rebdog
fix mistakenly changed oscam-config.h defaults
10:35 PM Changeset [3337] by rebdog
fixes for missing bracket warnings around cs_debug when compiled …
10:19 PM Changeset [3336] by schlocke
cccam: changed card update order back to add new - remove old because …
10:18 PM Ticket #837 (caid 096c now missing from videoguard2 atr list) closed by rebdog
fixed: Closing added
10:15 PM Ticket #846 (sky caid 09c4 since 3033 not readable anymore after restart) closed by rebdog
fixed: closing as fixed
10:08 PM CardsList edited by GuJack20
(diff)
9:58 PM Changeset [3335] by _network
remove udp pipes
9:47 PM Ticket #966 (now shutdown not works for remot control, oscam monitor) created by nkanga
now shutdown not works for remot control, oscam monitor.
9:04 PM Ticket #965 (ECM reset form Serial or USB Smartreader) created by ringotr
oscam running, the card counter, Is it possible to reset after a …
7:55 PM Changeset [3334] by schlocke
cccam: login-auth now showing crypted correct
7:48 PM Ticket #963 (config.sh: if disable debug = error on module-dvbapi.c) closed by alno
fixed: in #3333 yipieh ;-)
7:48 PM Changeset [3333] by alno
fix for Ticket #963
6:02 PM Ticket #964 (client number not equal to client number on log) created by krow
I've been looking at log and I have (for example) cliente nº 30 on log …
5:37 PM Ticket #962 (config.sh: if disable debug = error on module-dvbapi.c) closed by d4ng3rus
duplicate
5:29 PM Ticket #963 (config.sh: if disable debug = error on module-dvbapi.c) created by alborland
for testing i disbaled cs_debug in config.sh and try build but than …
5:29 PM Ticket #962 (config.sh: if disable debug = error on module-dvbapi.c) created by alborland
for testing i disbaled cs_debug in config.sh and try build but than …
4:34 PM Ticket #961 (Makefile with -DWEBIF) closed by alno
wontfix: Think merek has removed it because you can very easy use the …
4:13 PM Ticket #961 (Makefile with -DWEBIF) created by wiwe
Please set -DWEBIF again into Makefile as in the last svn's before, so …
4:01 PM Ticket #960 (Since #3332 no connection to WebIf) closed by wiwe
fixed: Found it out! Makefile's in the last checkouts are without -DWEBIF. …
1:33 PM Ticket #960 (Since #3332 no connection to WebIf) reopened by wiwe
Any changes in oscam.conf in last time?? here my config: [webif] …
1:21 PM Ticket #960 (Since #3332 no connection to WebIf) closed by d4ng3rus
invalid: the webif works perfectly control your conf
1:11 PM Ticket #960 (Since #3332 no connection to WebIf) created by wiwe
Since installation from svn 3332 is WebIf from browser (firefox) not found!
12:00 PM Changeset [3332] by landlord
Documentation update for 'updateinterval', again.
11:21 AM Ticket #952 (Docu of parameter 'updateinterval' is wrong) closed by landlord
fixed: Done. Thanks for input.
11:20 AM Changeset [3331] by landlord
Documentation update for 'updateinterval'.
11:16 AM Changeset [3330] by landlord
Limiting of SIDs on reader: 'ratelimitecm' and 'ratelimitseconds'.
10:53 AM CardsList edited by GuJack20
(diff)
10:38 AM Changeset [3329] by landlord
Documentation for new parameter 'failbantime'.
9:33 AM Changeset [3328] by schlocke
auth client: ip block/dyndns etc fixed cccam: reversed card exchange, …
5:47 AM Changeset [3327] by rebdog
readervideoguard: preparations for modular compiling
3:44 AM Changeset [3326] by Gorlan.Ng
fix debug infos
3:20 AM Changeset [3325] by Gorlan.Ng
dvbapi: add some debug infos
1:43 AM Changeset [3324] by rorothetroll
updated the comments in the cw emm processing
1:28 AM Changeset [3323] by rorothetroll
more cw emm. fix the len of the final reassembled emm
1:20 AM Changeset [3322] by rorothetroll
fix a memcpy for the reassembled emm in the cw emm processing
12:45 AM Changeset [3321] by rebdog
readervideoguard: move more common code to reader-videoguard-common.c

Sep 30, 2010:

11:59 PM Changeset [3320] by rorothetroll
reset emm_global_len after reassenbling cw emm. Something is broken in …
11:55 PM Changeset [3319] by alno
WebIf: ad failbantime parameter to config
11:50 PM Changeset [3318] by alno
WebIf: Add failban overview and managing
11:34 PM Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) closed by alno
fixed: […] No, you try to kick the Developers in their asses by setting …
11:21 PM Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) reopened by krow
sorry to be posting here all day but I think this is a serious issue …
8:50 PM Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) closed by _network
fixed: please use the forum to report problems. there at least 3 different …
7:57 PM Ticket #959 (rev 3317 oscam killed on fritzbox) closed by alno
worksforme: I have checked camd3 protocol there all is working. Check your config …
7:05 PM Ticket #959 (rev 3317 oscam killed on fritzbox) created by alborland
using oscam 3317 on fritzbox-server camd35 proto to client dm800 (also …
6:33 PM Changeset [3317] by alno
fix bug in emm blocker
5:09 PM Ticket #795 (Oscam CCCam server svn3047 send Wrong Node Data) closed by linky777
fixed: schlocke I was test oscam svn 3316 Now send 4 byte for SA all …
5:01 PM Ticket #958 (the problem after changeset 3316) created by eskimofan
when I watch the program of 115.5E, the simulcrypt channel only show …
3:50 PM Ticket #957 (Client cccam after 20 seconds receive 0 cards) created by trifolo6969
oscam 3316 at connection all client recive the cards, after 20 seconds …
3:22 PM Ticket #858 (dvbapi ,handle multiple ecm) closed by Gorlan.Ng
fixed: fixed at r3316.
2:17 PM Changeset [3316] by Gorlan.Ng
dvbapi: add support for ecms based on stream not channel that seen on …
1:56 PM Changeset [3315] by Gorlan.Ng
fix unsigned short millitm overflow
1:40 PM Changeset [3314] by Gorlan.Ng
cccam: clear cards when client closed. fix recursive lock problem …
12:56 PM Changeset [3313] by Gorlan.Ng
minor fixes for modular compiling
12:50 PM Changeset [3312] by Gorlan.Ng
fix a compile warning
11:54 AM Changeset [3311] by _network
some minor fixes
10:38 AM Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) reopened by serquano
after 24 hours without crashes, just a moment ago processes of 2 …
10:04 AM Ticket #956 (oscam card Nagra3 + smartgo under ubuntu 10.4 x64 ERROR, function call ...) created by hadesv
For a time is fine but after it appears .. 2010/09/30 8:25:48 31715 …
9:14 AM Changeset [3310] by schlocke
cccam: removed duplicate cards from different sources by remote_node_id
8:26 AM Ticket #944 (multiple instances of oscam crashes or quits silently on new versions) closed by serquano
worksforme: tested 24hrs r3293 is not crashing definetely.. superb fixing, thanks …
8:19 AM Changeset [3309] by alno
fix typo
8:17 AM Changeset [3308] by alno
implement a failban functionality new parameter …
7:57 AM Changeset [3307] by schlocke
cccam: card exchange exhances, transfering remote node ids
5:06 AM Ticket #759 (DVBAPI should not enabled for mipsel) closed by nx111
wontfix: you can comment these lines in oscam-config.h
4:54 AM Ticket #576 (priority CAID and preferlocalcards not worked correctly) closed by nx111
fixed: it's might be fixed,since from 2522.
1:45 AM Ticket #955 (3304 error compiling on debian5) closed by rorothetroll
fixed
1:36 AM Changeset [3306] by rorothetroll
fix missing remote_nodes in struct cc_card
1:21 AM Changeset [3305] by rorothetroll
added more debug for cw emm in dvbapi
12:48 AM Ticket #955 (3304 error compiling on debian5) created by krow
[…]
12:44 AM Changeset [3304] by schlocke
cccam: updated reporting cards

Sep 29, 2010:

8:00 PM Ticket #954 (OSCam Login Passwort Bug - Access with every passwort of same length ...) created by scooter4096
Sorry if this issue is already fixxed - don't have the possibility to …
6:29 PM Ticket #953 (Viaccess card after EMM key not found) created by HOT-X
After start oscam which paid shows the channel, when I switch to the …
6:26 PM Ticket #952 (Docu of parameter 'updateinterval' is wrong) created by blaky
this you can found in oscam.server: "updateinval = seconds interval …
5:26 PM Changeset [3303] by rorothetroll
change my cs_dump to cs_log to help debugging cryptoworks emm as the …
4:41 PM Ticket #951 (Reporting card on 3302 -> every 20 seconds without cards changing) created by FilipeAmadeuO
I get every 20 seconds: 2010/09/29 15:36:07 23948 c10 cccam(s) abcd: …
4:41 PM Ticket #950 (Dynamic limiting sid for cards that allow only a number of ecms from ...) created by lalakis7
I have made some changes that allow for dynamic limiting of sids on a …
3:36 PM Ticket #948 ([3288] Client connection drops if no access to monitor) closed by schlocke
invalid: The oscam-cccam-server disconnects a client if it is inactive longer …
2:11 PM Changeset [3302] by schlocke
cccam: SA format changed, card-update interval 0 valid for updates …
1:44 PM Ticket #940 (Segmentation fault error - Problem with oscam.tiers) closed by FilipeAmadeuO
invalid
11:12 AM Ticket #943 (keepalive after maxidle is reached -> Mipsel problem) closed by FilipeAmadeuO
fixed: Corrected on 3300
10:49 AM Changeset [3301] by schlocke
cccam: format of SA in card-sharelist changed
10:09 AM Ticket #949 (Problems with processing Conax ECMs) created by przemoka
I found a bug in while processing the ECMs. First of all, the log, …
10:06 AM Changeset [3300] by schlocke
cccam: changed behaviour of card update interval, now updates only if …
9:30 AM Changeset [3299] by merek
cosmetic fixes
9:21 AM Changeset [3298] by merek
Fix default WEBIF setting in Makefile
9:17 AM Changeset [3297] by merek
modular: Adding Tongfang to config script
8:45 AM Changeset [3296] by alno
modular - adding Anticascader to config script
8:04 AM Ticket #675 (oscam merge two cards for au users) reopened by mouadhada
Still have the same problem with trunck 3291. So reopened
Note: See TracTimeline for information about the timeline view.