Timeline
01/06/11:
- 23:51 Ticket #1442 (all new version have disconnect client) closed by
- invalid: minimum requirements missing... RTFM!
- 23:24 Ticket #1442 (all new version have disconnect client) created by
- I have 15 client for newcamd. All ok 30min and begins disconnect
- 23:15 Changeset [4352] by
- add framework for cardreader, please review
- 23:11 Changeset [4351] by
- irdeto: apply dahlia activation patch (thx to ftp21)
- 23:10 Changeset [4350] by
- viaccess: apply emm reassembling patch (thx to monty05)
- 22:36 Changeset [4349] by
- Small docu update
- 22:34 Changeset [4348] by
- The parameter aeskey has been replaced through the more comprehensive …
- 21:52 Changeset [4347] by
- Config: increase number of Betatunnel mappings from 16 to 20
- 21:51 Ticket #1405 (OScam runs on 100% CPU load) updated by
- Here's a new patch, based on lattjo's work. It initializes a 1702 and …
- 21:32 Ticket #1441 (Webif problem introduced with last changes) closed by
- fixed: Fixed 4346
- 20:46 Changeset [4346] by
- Fix if there are zeros at the end of the rsakey. Cleanup aeskey output.
- 20:29 Changeset [4345] by
- XMLAPI: readerstats las access -> ISO Timeformat
- 20:07 Changeset [4344] by
- Remove tiger_rsakey and n3_rsakey => use rsakey instead. Remove …
- 19:34 Changeset [4343] by
- camd35: small change with CMD08 handling
- 19:15 Changeset [4342] by
- camd35: handling of sleepstate changed
- 19:13 Ticket #1441 (Webif problem introduced with last changes) updated by
- I get : rsakey = …
- 18:56 Changeset [4341] by
- Config: remove unused parameters from reader config, mk_t function for …
- 18:27 Ticket #1439 (GLIBC_2.3.3 not defined in file libpthread.so.0 - MIPS) updated by
- Please try again with latest revision [4340]!
- 18:26 Changeset [4340] by
- Fix issue mentioned in #1439
- 18:00 Ticket #1441 (Webif problem introduced with last changes) updated by
- zeros on top? on bottom? in front of? behind? I dont use rsakeys so i …
- 17:40 Ticket #1441 (Webif problem introduced with last changes) created by
- With SVN4339 there are several changes/bugs in oscam.servers. The …
- 15:34 Changeset [4339] by
- WebIf: improve styles of debuglevel selector
- 13:59 Ticket #1440 (timeout when perfer local set to On with newcamd protocol as a proxy) created by
- = Revision #4337 or before = Issue Description if we setup perfer …
- 13:25 Changeset [4338] by
- Config: fix defaults
- 12:35 Changeset [4337] by
- WebIf: multiple debuglevel selection in status & files/logfile Skin …
- 11:13 Changeset [4336] by
- Config: fix cccam updateinterval (THX FilipeAmadeuO for report)
- 09:44 Changeset [4335] by
- Config: more simplify config.c and reduce code
- 05:15 Ticket #1439 (GLIBC_2.3.3 not defined in file libpthread.so.0 - MIPS) updated by
- I noticed revision 3666 had fixed similar error, I tried changing …
- 04:24 Ticket #1439 (GLIBC_2.3.3 not defined in file libpthread.so.0 - MIPS) updated by
- Just to add oscam then dies.
- 04:22 Ticket #1439 (GLIBC_2.3.3 not defined in file libpthread.so.0 - MIPS) created by
- = Revision <4334> = Issue Description <oscam: relocation error: …
- 02:02 Ticket #1438 (r4333 - Restart an Proxy cause a crash.) created by
- = Revision r4333 = Issue Description When a proxy is restarted from …
- 01:15 Changeset [4334] by
- Cleanup redundant key_atob functions
- 00:22 Changeset [4333] by
- WebIf: fix small issue with nano settings
01/05/11:
- 23:43 Changeset [4332] by
- Config: remove multiple code
- 21:58 Changeset [4331] by
- Some more cleanups
- 21:29 Changeset [4330] by
- WebIf: allow write configfiles also if not yet exist
- 21:18 Ticket #1269 (Patch emm support for SRG/SSR (0500:040810)) updated by
- Hello, I have attached a patch with modifications of …
- 21:18 Changeset [4329] by
- Remove obsolete parameter maxqlen (didn't even exist in mpcs 0.9e...)
- 20:59 Ticket #1194 (ShowCLS Command not implemented in the WebIF / Doc update for "usrfileflag") closed by
- fixed
- 20:58 Changeset [4328] by
- WebIf: showcls parameter now saved Ticket #1194
- 20:56 Ticket #1437 (Card system not supported - Videogard 0926) created by
- = Revision 1.00 build #4066 = Issue Description Card system not …
- 20:40 Changeset [4327] by
- corrections for last commit
- 20:19 Changeset [4326] by
- Config: preparing mk_t_nano()
- 19:39 Ticket #1435 (Webif - OFFline CCcam proxy listed with wrong protocol) closed by
- fixed
- 19:38 Ticket #1436 (Daring!TV dvbapi: read error 145 on fd 29) updated by
- This is no an OScam Problem. Channel has Encrypten Problems.
- 19:38 Changeset [4325] by
- WebIf: Description in mouseover, clean protocol column Ticket #1435
- 17:22 Ticket #1436 (Daring!TV dvbapi: read error 145 on fd 29) created by
- = Revision 4324 = Issue Description oscam does not encode dvbapi …
- 16:27 Ticket #1003 (OScam with two or more pcsc readers don't work) updated by
-
Cc changed
- 16:15 Ticket #1435 (Webif - OFFline CCcam proxy listed with wrong protocol) created by
- = Revision 4324 = Issue Description Webif - OFFline CCcam proxy reader …
- 12:47 Changeset [4324] by
- loadbalancer: Additional fix for last commit
- 12:42 Changeset [4323] by
- loadbalancer: Fix for no matching reader: If services defined on a …
- 12:38 Ticket #1333 (Dahlia Card) updated by
- I've added a patch for activation of the card (untested but the emm …
- 11:18 Changeset [4322] by
- loadbalancer: added special handling for readers returning not found …
- 11:04 Changeset [4321] by
- webif: fixed cccam entitlement cccam 2.2.1 experimental removed cccam …
- 10:20 Ticket #1344 (All 1.0 version multiply clients) updated by
-
Component changed
- 10:15 Ticket #1350 (CCcam reader: IP adress resolved ok but displayed wrong in Log) updated by
- we have a special function in simples.c which display the right order …
- 10:08 Ticket #1344 (All 1.0 version multiply clients) updated by
- I want to propose a temporary solution which could be implemented in a …
- 09:52 Ticket #1350 (CCcam reader: IP adress resolved ok but displayed wrong in Log) reopened by
- Sorry, checked wrong files. It is still wrong, but I made a diff …
- 09:30 Ticket #1350 (CCcam reader: IP adress resolved ok but displayed wrong in Log) closed by
- fixed: I just cecked and found this fixed in latest revision (maybe earlier). THX
- 09:10 Ticket #1376 (Strange Viaccess behavior) updated by
- It is a V2.5 version card, and I think it doesn't use aeskey for …
- 06:55 Ticket #1245 (ERROR in IO_Serial_Read errno=0 (was : Timeouts after 2,5 hours)) closed by
- worksforme: OK, if those are cosmetic bugs only, let's close this. Thank you for …
- 03:29 Ticket #1434 (ALSO ONE MORE THING ABOUT THE allowedtimeframe config.) closed by
- wontfix: 20 timeframes? What the hell are you trying? Unless someone provides a …
- 03:25 Ticket #1432 (allowedtimeframe = hh:mm-hh:mm DOES NOT WORK!!) updated by
- <Don't forget to ATTACH (not post here) a log file of oscam in debug …
- 03:11 Ticket #1433 (EMM ENHANCEMENT to be able to controls card EMM) closed by
- worksforme: These settings already exist: blockemm-u, blockemm-s, blockemm-g and …
- 03:07 Ticket #1434 (ALSO ONE MORE THING ABOUT THE allowedtimeframe config.) created by
- = Reason for enhancement I would like and thank if I could also be …
- 03:04 Changeset [4320] by
- Config: write 'blocknano' parameter to oscam.server
- 03:02 Ticket #1433 (EMM ENHANCEMENT to be able to controls card EMM) created by
- = Reason for enhancement Control or limit the EMM updates to the card. …
- 02:57 Ticket #1432 (allowedtimeframe = hh:mm-hh:mm DOES NOT WORK!!) created by
- = Revision All the latest ones from releases from 4000 and 3888 I …
- 02:44 Ticket #1334 (Total tv (bnet totaltv nds card)) updated by
-
Component changed
- 02:43 Ticket #1334 (Total tv (bnet totaltv nds card)) updated by
-
Priority changed
- 02:43 Ticket #1334 (Total tv (bnet totaltv nds card)) updated by
- You may try to set unlockparental=1 in the configuration of your …
- 02:28 Ticket #1323 (Dsmart 42e türksat not more working.. sd and hd ..) updated by
-
Priority, Component, Severity changed
- 02:26 Ticket #1291 (OSCam Crash on Nagra Card Init (SSL Active)) updated by
- Does this problem still exist in current revisions?
- 02:23 Ticket #1376 (Strange Viaccess behavior) updated by
-
Priority, Type, Component, Severity changed
Please provide more information about which card this is and if there … - 02:19 Ticket #1191 (QboxHD LED support: added card status feedback) closed by
- fixed
- 02:19 Ticket #1191 (QboxHD LED support: added card status feedback) updated by
- Added in [4280].
- 01:57 Ticket #1318 (adaptions for usage on relook400s neumo-3.4.x) updated by
-
Priority, Severity changed
Can you provide a patch against current trunk? - 01:49 Ticket #1175 (Support of NDS 09BD) updated by
-
Priority, Type changed
- 01:48 Ticket #1424 (new card: ADM Irdeto 2 ACS 6) updated by
-
Priority, Type, Severity changed
- 01:47 Ticket #1388 (Support of NDS 090D (new)) updated by
-
Priority, Type, Severity changed
- 01:35 Ticket #1348 ([newcamd] ports doenst display correct caid) updated by
- Which client are you using? I can't reproduce this with mgcamd 1.35 on …
- 01:31 Ticket #1320 (CMakeLists has problems due to unset()) closed by
- fixed
- 01:31 Changeset [4319] by
- Use set(xxx False) instead of unset(xxx) in order to support older …
- 01:16 Ticket #22 (Irdeto CAM key/data) closed by
- fixed: Should be fixed in [1200].
- 01:11 Ticket #713 (Support for Dahlia Card (CAID: 0662 ACS V5.7)) closed by
- duplicate: Ticket #1333 seems to provide a more recent patch for this.
- 01:07 Ticket #1395 (emm from cccam 2.2.1 to oscam server failed) closed by
- invalid: cccam emm under development, please use streamobard forum for …
- 01:02 Ticket #1110 (build #3146 - master deadlock when mgcamd client disconnects) closed by
- worksforme
- 01:01 Ticket #1377 (High CPU Usage 4158) closed by
- duplicate: newer ticket has more info…
- 01:00 Ticket #1408 (High CPU usage CCcam Reader) updated by
- Does the load go up linear with adding more CCcam readers or is there …
- 00:58 Ticket #1338 ([patch] TNTSAT fix nano D2 0b AES) updated by
- Only fault on pcsc reader in others like phoenix or internal reader …
- 00:56 Ticket #1353 (Coolstream Oscam-mgcamd) closed by
- fixed: not sure which revision…
- 00:49 Ticket #1338 ([patch] TNTSAT fix nano D2 0b AES) closed by
- fixed: this ticket is about card support, not pcsc reader!!!
- 00:49 Ticket #1396 (FreeBSD patchset against HEAD revision) closed by
- fixed: Add patch from #1396
- 00:48 Changeset [4318] by
- Add patch for FreeBSD libusb support from #1396.
- 00:35 Ticket #598 (Feature Request: Global ignore / allow.list) closed by
- fixed
- 00:25 Ticket #1064 (block nano for provider 0664 to avoid paired card blocking) updated by
- Did you try the blocknano option in the reader?
- 00:24 Ticket #1245 (ERROR in IO_Serial_Read errno=0 (was : Timeouts after 2,5 hours)) updated by
- is it working now or not? if yes, i´d say the error messages are just …
- 00:22 Ticket #1294 (Wrong Monlevel selected in Web) closed by
- fixed
- 00:20 Ticket #1402 (Cant start latest compiled oscam on debian5) closed by
- fixed
- 00:19 Changeset [4317] by
- WebIf: Correct error message from last commit.
- 00:17 Ticket #1349 (Web Interface set to readonly - can still delete readers) closed by
- fixed
- 00:16 Changeset [4316] by
- WebIf: Fix: Deleting or disabling reader in readonly mode is not …
- 00:15 Ticket #1234 (Creating new reader using Webif does not save protocol) closed by
- fixed: fixed, not sure which revision…
- 00:14 Ticket #1216 (OScam crashes when switching logs) closed by
- fixed: no update - closed…
- 00:07 Ticket #1431 (value "savenano" don't save with WebIF) closed by
- fixed
- 00:06 Changeset [4315] by
- Config: write 'savenano' parameter to oscam.server
01/04/11:
- 23:57 Ticket #1178 (oscam crashs when i want to Edit a Reader over WebIf) closed by
- fixed: fixed - not sure which revision…
- 23:53 Ticket #1169 (dvbapi does no shared emm updates) closed by
- fixed: no update - closed…
- 23:51 Ticket #1163 (Via$at 09E3 card locks up after an hour or so - resumes after reset) updated by
- problem still exist with latest version?
- 23:50 Ticket #1128 (EMM filter in DVBapi for SECA (CAID 0100)) closed by
- fixed: no update - closed…
- 23:48 Ticket #1064 (block nano for provider 0664 to avoid paired card blocking) updated by
- please post some log, don´t forget to remover card serials, etc.
- 23:46 Changeset [4314] by
- WebIf: Fix issue with serial clients (THX @ sulge ) Discussion: …
- 23:27 Ticket #949 (Problems with processing Conax ECMs) closed by
- fixed: please test with latest version if problem still exist.
- 23:25 Ticket #881 (Invalid address on Radegast with svn3210) closed by
- invalid: no log - closed…
- 23:22 Changeset [4313] by
- WebIf: Do some cleanup and reduce malloc usage a little bit
- 23:20 Ticket #1431 (value "savenano" don't save with WebIF) updated by
- it's ture. I note this issue long time.
- 23:19 Ticket #825 (2x tbsdtv reader (USB Phoenix&SmartMouse) TBS-3102V13 - one dont work) closed by
- fixed: please test with latest version - we are now more than 1000 revisions …
- 23:06 Changeset [4312] by
- WebIf: fix memleak
- 22:46 Ticket #629 (Dynamic smartcard sid assign) closed by
- invalid: not heard anything about this problem since many months…
- 22:40 Changeset [4311] by
- Config: remove further double code
- 22:38 Ticket #588 (Romanian DTH HD) closed by
- wontfix
- 22:30 Ticket #390 (NDS Parental Code For R18 Channel) closed by
- invalid: no log provided by user - closed…
- 22:28 Changeset [4310] by
- Config: remove double code in config.c and http.c
- 22:20 Ticket #1411 (OSCAM reads on multiple Readers) closed by
- invalid: no log - closed…
- 22:14 Ticket #1431 (value "savenano" don't save with WebIF) created by
- = Revision all = When the issue occurs changing a internal Reader …
- 21:53 Ticket #766 (I can't add aes in webif - parameter aeskeys (with 's' is not saved)) closed by
- fixed
- 21:50 Changeset [4309] by
- WebIf: correct 'aeskeys' parameter handling
- 21:15 Changeset [4308] by
- WebIf: implement 'aeskeys' parameter (untested)
- 20:59 Ticket #1406 (New Skylink IRDETO(CAID: 0624) card not working in Oscam) updated by
- Replying to smokey24: > Have you tryed a camkey for irdeto …
- 20:48 Changeset [4307] by
- Config: fix typo, prepare another mk_t function
- 20:40 Changeset [4306] by
- Config: start simplifying code in config.c
- 19:46 Changeset [4305] by
- WebIf: add account description to username mouseover config: preparing …
- 15:35 Ticket #1429 (hi i have d-samrt 42E car) updated by
- 2011/01/04 15:32:22 11653 r02 IFD Transmit succesful 2011/01/04 …
- 15:27 Ticket #1429 (hi i have d-samrt 42E car) updated by
- 2011/01/04 15:25:40 10788 r02 Found smartreader device 003:002 …
- 15:22 Ticket #766 (I can't add aes in webif - parameter aeskeys (with 's' is not saved)) updated by
-
Keywords, Priority, Severity changed
I increased the severity because every time I add a reader or I edit a … - 15:13 Ticket #1429 (hi i have d-samrt 42E car) updated by
- how i can fine it frind i haev 3 card in oscam
- 15:05 Ticket #1430 (Webif - CCcam reader entitlement shows only the last provider in card) created by
- = Revision 4304 = Issue Description When you look at the entitlements …
- 14:26 Ticket #1429 (hi i have d-samrt 42E car) updated by
- and where is the -d 255 log from the card init? don´t forget to remove …
- 14:17 Ticket #1429 (hi i have d-samrt 42E car) created by
- hi iahev card the system read the card but it not give any ecm cccam1 …
- 01:34 Ticket #1428 (Linux AZBox 2.6.15-sigma - oscam.dvbapi "M" feature does not work) created by
- = Revision All after 4199 for Linux AZBox 2.6.15-sigma # 138 PREEMPT …
- 00:44 Ticket #1426 (webif over http dyndns not working) closed by
- invalid: configuration issue (but now we have better logging... ;) )
- 00:22 Ticket #1426 (webif over http dyndns not working) updated by
- after my change both addresses are the same and its working fine, …
- 00:19 Ticket #1406 (New Skylink IRDETO(CAID: 0624) card not working in Oscam) updated by
- Have you tryed a camkey for irdeto card ?? Boxkey : 0000000000000000 …
- 00:08 Ticket #1426 (webif over http dyndns not working) updated by
- from 4302 onwards you have to see in debuglevel 1 an entry like this: …
01/03/11:
- 23:56 CardsList edited by
- 0624 (diff)
- 23:53 Ticket #1406 (New Skylink IRDETO(CAID: 0624) card not working in Oscam) updated by
-
Cc changed
- 23:10 Ticket #1321 (Oscam Crash after some minutes) updated by
- Hi, I think i have solved my problem with schedtool on x64 ubuntu …
- 23:09 Ticket #1354 (Segmentation Fault ubuntu 10.10) updated by
- Hi to all, I think i have solved my problem with schedtool on x64 …
- 21:07 Ticket #1344 (All 1.0 version multiply clients) updated by
-
Priority changed
- 20:49 Ticket #1426 (webif over http dyndns not working) updated by
- additional info i have change the dyndns to my own dyndns (client …
- 20:40 Ticket #1426 (webif over http dyndns not working) updated by
- ok start with -> ./oscam -d1 , output Revision 4304 on dbox2 …
- 20:01 Changeset [4304] by
- XMLAPI: readerstats times in ISO format
- 19:35 Ticket #1426 (webif over http dyndns not working) updated by
- On my end it works without problems. However I have added some …
- 19:34 Changeset [4303] by
- WebIf: add some debug output (-d1) on httpdyndns resolving
- 19:25 Ticket #1269 (Patch emm support for SRG/SSR (0500:040810)) reopened by
- newcamd and mgcamd had always worked. But until now, oscam is unable …
- 19:16 Ticket #1245 (ERROR in IO_Serial_Read errno=0 (was : Timeouts after 2,5 hours)) updated by
-
Keywords, Summary changed
Seems that after I changed image from VTI 2.2 to VTI 2.3 … - 18:10 Ticket #1426 (webif over http dyndns not working) updated by
- Replying to alno: > Log while trying to call? 2 times …
- 16:32 Ticket #1427 (the sleep and the failban = 4 don't work correct) updated by
- > my clients is cccam clients if set on > user.conf the sleep = 1 min …
- 15:49 Ticket #1427 (the sleep and the failban = 4 don't work correct) created by
- = Revision <OSCAM 1.00-unstable_svn build #4302> = Issue Description …
- 15:40 Ticket #1422 (TNT sat - only 7 ecm is allowed) closed by
- invalid: check the sleep parameter of user 'testserver'. Seems you have set …
- 15:35 Ticket #1422 (TNT sat - only 7 ecm is allowed) updated by
-
Component, Severity changed
- 14:41 Ticket #1010 (Please add a LICENSE/COPYING file) closed by
- invalid: There's no answer from Dukat yet.
- 14:39 Ticket #1321 (Oscam Crash after some minutes) closed by
- invalid: Sorry, but we can not verify this.
- 14:37 Ticket #1354 (Segmentation Fault ubuntu 10.10) closed by
- invalid: We can not verify your problem.
- 14:13 Changeset [4302] by
- cccam: updated emm handling (reader)
- 13:32 Changeset [4301] by
- Documentation update: parameter 'realname' changes to 'description'.
- 13:26 Changeset [4300] by
- empty user-descriptions now not written to config
- 13:10 Changeset [4299] by
- loadbalancer: fixed min ecm time
- 12:49 Ticket #1425 (oscam run as cccam server and takes the same time same sid on my 4 readers) closed by
- fixed
- 12:48 Ticket #1425 (oscam run as cccam server and takes the same time same sid on my 4 readers) updated by
- fixed with load balance command ... thanks :)
- 12:09 Changeset [4298] by
- fixed garbage collector start
- 11:51 Changeset [4297] by
- build file update
- 11:48 Changeset [4296] by
- internal change of memory and thread handling: garbage collector …
- 10:47 Ticket #1426 (webif over http dyndns not working) updated by
- Log while trying to call?
- 10:39 Ticket #1426 (webif over http dyndns not working) created by
- = Revision 4280 = Issue Description 403 Forbidden Access denied my …
- 10:06 Changeset [4295] by
- Added hint for compile options to documentation.
- 10:00 Changeset [4294] by
- Added new parameter 'realname' to documentation.
- 09:59 Ticket #1413 (The serial port for SSSP is not initialized.) closed by
- fixed: Fixed in r4293
- 09:58 Ticket #1243 (module-serial.c multiple instances.) closed by
- fixed: Fixed in r4293
- 09:56 Ticket #1122 (Serial section) closed by
- fixed: Fixed in r4293
- 09:56 Changeset [4293] by
- Fixed serial support
- 09:12 Ticket #1365 (Add Support for additional 241 Cards) closed by
- fixed: Fixed in r4292
- 09:12 Changeset [4292] by
- Support some additional Nagra 3 NA cards
- 07:21 Ticket #1344 (All 1.0 version multiply clients) reopened by
- Unfortunately the same problem still appering ,I have tried with 4290 .
01/02/11:
- 23:47 Changeset [4291] by
- Config: Add Parameter 'realname' to userconfig. No functional …
- 23:14 Changeset [4290] by
- XMLAPI: move timeformats to ISO in header and Status
- 20:27 Ticket #1269 (Patch emm support for SRG/SSR (0500:040810)) closed by
- worksforme: Tryed with OSCAM Build 4289, vdr-sc and newcamd and now i gor the emm …
- 19:23 Ticket #1122 (Serial section) updated by
-
Keywords, Owner, Status changed
- 17:46 Changeset [4289] by
- XMLAPI: replace formated time in header through unixtime, add uptime (sec)
- 16:40 Ticket #1425 (oscam run as cccam server and takes the same time same sid on my 4 readers) created by
- = Revision <4286> hello to all happy new year 2011 , i run the oscam …
- 16:33 Changeset [4288] by
- Monitor + WebIf: warningmessage on try switching debuglevel on …
- 13:44 Changeset [4287] by
- XMLAPI: some cosmetics for last commit
- 13:14 Changeset [4286] by
- loadbalancer: fix for no matching reader, automatic reopen readers
- 13:07 Changeset [4285] by
- internal: NULLFREE now first sets null, then frees internal: speed up …
- 13:06 Changeset [4284] by
- XMLAPI: add 'answered' attribute in status. Contains the reader which …
- 12:49 Changeset [4283] by
- cwlastresponse readers/proxies added
- 11:03 Changeset [4282] by
- WebIf: remove 'experimental' tagging of newer cccam protocols
- 01:30 Ticket #1424 (new card: ADM Irdeto 2 ACS 6) created by
- OSCam Version : 1.00 Build : 4066 Configuration : DM800 + …
- 00:09 Changeset [4281] by
- XMLAPI: add attribute 'au' in status
Note:
See TracTimeline
for information about the timeline view.