Timeline
04/09/11:
- 23:40 Ticket #1765 (Error activating card/Card initializing error D09 KDG) updated by
- Replying to Deas: > try to start oscam in debug mode - …
- 23:33 Ticket #1765 (Error activating card/Card initializing error D09 KDG) updated by
- try to start oscam in debug mode - there is a similar ticket here for …
- 23:22 Ticket #1765 (Error activating card/Card initializing error D09 KDG) updated by
- Replying to pooyair: > u might mean after changeset 4811 …
- 22:41 Ticket #1765 (Error activating card/Card initializing error D09 KDG) updated by
- u might mean after changeset 4811 this problem occurred isn't it? so …
- 21:30 Ticket #1729 (The CCcam client not working) reopened by
- Ok, you are using reshare_mode=3 with minimize_card=2. This is a …
- 21:24 Ticket #1756 (save reader by webif) updated by
- It seems like you're using httpsavefullcfg=1, correct?
- 20:15 Ticket #1765 (Error activating card/Card initializing error D09 KDG) updated by
- Attached for reference and diagnosis please find oscam logfile …
- 20:07 Ticket #1729 (The CCcam client not working) closed by
- invalid: I use the old one (4857). That's good work. Thanks…
- 19:38 Ticket #1765 (Error activating card/Card initializing error D09 KDG) updated by
- Replying to BurnMasterRecords: > > {{{ > 2011/04/09 …
- 19:07 Ticket #1765 (Error activating card/Card initializing error D09 KDG) updated by
- […] You need Card Modulus and Pairing Key to get this Card working.
- 18:59 Ticket #1765 (Error activating card/Card initializing error D09 KDG) created by
- = Revision version=1.00-unstable_svn, build #4965, …
- 18:55 Ticket #1763 (High CPU Load (100%) with >#4965) updated by
- ARM dockstar with about 25 Proxys / Clients. I will try this later and …
- 17:12 Ticket #1762 (ECM response time after 4963) updated by
- Do you have high load (see #1763 and the patch there)? Do you compile …
- 16:34 Ticket #1763 (High CPU Load (100%) with >#4965) updated by
- Of which plattform and which amount of users/proxies do you speak?
- 16:17 Ticket #1764 (*** glibc detected *** ./oscam.x86: corrupted double-linked list: ...) created by
- hi server clearos 5.2 with oscam v4956 after time ???? is turn off …
- 15:13 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- Oscam 4965 work fine! thanks a lot.
- 12:33 Ticket #1763 (High CPU Load (100%) with >#4965) updated by
- No High CPU Load on x64 / arm / ppc / mips here
- 12:28 Ticket #1763 (High CPU Load (100%) with >#4965) created by
- = Revision >4965 = Issue Description 100% Cpu, 4963: normal behavior …
- 11:58 Ticket #1723 (caid 0664 problem) updated by
-
Summary changed
- 11:41 Ticket #1762 (ECM response time after 4963) created by
- = Revision <Please fill in> Tested with 4965 = Issue Description …
- 02:39 Changeset [4965] by
- Add a check to prevent double frees in garbage collector. It also …
- 01:25 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- i have toolchain from openpli for DM500, may be will be useful
04/08/11:
- 23:55 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- As already said - the reason is the used toolchain. I have tested with …
- 23:16 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- 4964 is ok on DM500s and i686, thank you
- 22:39 Ticket #1758 (Definitions in globals.h, it's wrong!) updated by
- Hey guys, i wanna just help you!! I've no interest if you use int …
- 22:08 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- Build 4964 works again on dbox2.
- 22:01 Ticket #1758 (Definitions in globals.h, it's wrong!) updated by
- Everybody knows that oscam is not perfect. I't just a hobby project of …
- 21:58 Changeset [4964] by
- Tuxbox PPC has a toolchain which doesn't match some of the clients it …
- 20:28 Changeset [4963] by
- loadbalancer: another fix: log/save/load
- 20:23 Changeset [4962] by
- loadbalancer: caid-prov-sid-ecmlen handling fixed
- 20:20 Ticket #1760 (int is not always 32bit) updated by
- goffi, if you want to help developing post complete tested patches! …
- 20:16 Ticket #1758 (Definitions in globals.h, it's wrong!) updated by
- good luck ;)
- 20:09 Changeset [4961] by
- WebIf: add column in readerstats 'ECM Length'
- 20:01 Ticket #1760 (int is not always 32bit) updated by
- What i know is that long is always 32bit. Only int change size. May be …
- 19:59 Changeset [4960] by
- loadbalancer: prepared ecmlen for webif
- 19:52 Ticket #1758 (Definitions in globals.h, it's wrong!) updated by
- - if definitions of PIP_ID_TXT[] and RDR_CD_TXT[] are used in only one …
- 19:52 Changeset [4959] by
- loadbalancer now adds ecmlen to the statistics
- 19:36 Ticket #1760 (int is not always 32bit) updated by
- And unsigned long are 64bit in 64bit OS.
- 19:25 Ticket #1758 (Definitions in globals.h, it's wrong!) updated by
- PIP_ID_TXT[] and RDR_CD_TXT[] definitions are inside an #ifdef, only …
- 19:13 Ticket #1761 (Oscam 4951 x86 64bit crash) created by
- oscam 4951 crash pthread_mutex_lock.c:321: …
- 18:31 Ticket #1760 (int is not always 32bit) closed by
- wontfix: it shouldn't be a problem to patch this in you within your 16Bit build …
- 18:20 Ticket #1760 (int is not always 32bit) created by
- = Revision latest = Issue Description int is platform variable and …
- 17:41 Ticket #1759 (uchar instead ushort and ulong) updated by
- Ok, sorry!
- 17:37 Ticket #1758 (Definitions in globals.h, it's wrong!) updated by
- Opps, i fail about line 1174, it's inside a struct, but the others are …
- 14:06 Ticket #1755 (smargo does not read card) closed by
- invalid: there are many users that run these cards in a smargo - you should …
- 13:59 Ticket #1756 (save reader by webif) updated by
-
Description changed
- 13:36 Ticket #1757 (DIGI tv nagra4 card not run max 368mhz!) updated by
- @szili_boy anyway one who create this ticket not declared the card or …
- 12:19 Ticket #1759 (uchar instead ushort and ulong) closed by
- invalid: Would you please so kind and use the forum for discussions and …
- 12:10 Ticket #1757 (DIGI tv nagra4 card not run max 368mhz!) updated by
- Do you have any mhz and cardmhz parameter configurated in oscam.server …
- 11:59 Ticket #1759 (uchar instead ushort and ulong) created by
- = Revision latest = Issue Description may be a misunderstanding = …
- 11:51 Ticket #1757 (DIGI tv nagra4 card not run max 368mhz!) updated by
- The card is ROM190 Nagra 3 with 1880 CAID (Nagra 4 in a fucking …
- 10:59 Ticket #1758 (Definitions in globals.h, it's wrong!) updated by
- I do not understand your post. line 1174: […] I have never …
- 10:32 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- @horizon1: The issue is already identified - further confirmation ("me …
- 10:21 Ticket #1758 (Definitions in globals.h, it's wrong!) created by
- = Revision All = Issue Description Error with some ANSI/ISO compiler …
- 10:20 Ticket #1757 (DIGI tv nagra4 card not run max 368mhz!) closed by
- invalid: sorry this card is not supported by oscam yet
- 10:12 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- I tested the latest version 4956 of DM500 and got this message: …
- 09:17 Ticket #1757 (DIGI tv nagra4 card not run max 368mhz!) updated by
- is your card in list of supported cards? …
- 09:02 Ticket #1757 (DIGI tv nagra4 card not run max 368mhz!) created by
- My card reader omnikey. This is card not nagra2! 2011/04/07 18:13:35 …
- 07:52 Ticket #1756 (save reader by webif) updated by
- sorry for aeskey it's not possible to re edit ticket
- 07:44 Ticket #1756 (save reader by webif) created by
- = Revision 4907 ---> 4958 = Issue Description when you save reader by …
- 07:39 Ticket #1749 (oscam crash when open connection to clients) closed by
- fixed: 4958 dont crash
- 01:45 Changeset [4958] by
- WebIf: related to a suggestion of Vogi (SB) changing behavior of link …
- 01:21 Ticket #1649 (webif - disabling and re-enabling a reader deletes AES keys) closed by
- fixed: Committed in [4957].
- 01:20 Changeset [4957] by
- Fix for #1649: Don't clear aes list on reader thread cleanup anymore.
- 01:13 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- with all 3 commented oscam starts, and with pthread_cleanup_push and …
- 00:56 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- Did you remember that each line is used twice (oscam.c and …
- 00:47 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- Hi i have Comment all 3 Lines out, but binary dont start.
- 00:37 Ticket #1755 (smargo does not read card) updated by
- [reader] label = hdplus protocol = mouse detect …
- 00:29 Ticket #1752 (Oscam don't start on PPC (dbox2) @ Build 4947 & later) updated by
- lets dont discuss is this separate problem or not, for me is clear …
- 00:25 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- Yes because all are using the same toolchain and this is originally …
- 00:16 Ticket #1755 (smargo does not read card) updated by
- reader config? and no need to mask your atr - it´s the same on all cards…
- 00:11 Ticket #1755 (smargo does not read card) updated by
- i compiled my own versions and used the compiled ones from the forum.
- 00:10 Ticket #1755 (smargo does not read card) created by
- = Revision latest 4956 any many before = Issue Description I have two …
- 00:09 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- Replying to Admin: > Which glibc version do you have on …
04/07/11:
- 23:58 Ticket #1752 (Oscam don't start on PPC (dbox2) @ Build 4947 & later) updated by
- and wherer in #1743 do you read that it works on dbox2??? is it …
- 23:52 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- Which glibc version do you have on your DM500 and which one is used in …
- 23:47 Ticket #1752 (Oscam don't start on PPC (dbox2) @ Build 4947 & later) updated by
- Deas both a PPC, but two diffrent errors. Ticket 1743 = Oscam dont …
- 23:43 Changeset [4956] by
- Fixed syslog parameters
- 23:40 Ticket #1752 (Oscam don't start on PPC (dbox2) @ Build 4947 & later) updated by
- ah - dbox2 and dm500s are not ppc. ok…
- 23:29 Changeset [4955] by
- cleanup code
- 23:27 Changeset [4954] by
- fixed reader restart
- 23:21 Ticket #1752 (Oscam don't start on PPC (dbox2) @ Build 4947 & later) updated by
- because this is not duplicate!
- 23:18 Ticket #1752 (Oscam don't start on PPC (dbox2) @ Build 4947 & later) updated by
- and why do you update this ticket when it is marked as duplicate???
- 23:10 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- This is new problem and probably not connected with strptime problem, …
- 23:08 Ticket #1752 (Oscam don't start on PPC (dbox2) @ Build 4947 & later) updated by
- Exact the same problem as PPC
- 23:07 Ticket #1752 (Oscam don't start on PPC (dbox2) @ Build 4947 & later) updated by
- This is new problem and probably not connected with strptime problem, …
- 23:05 Ticket #1743 (oscam dont work on DM500 after version 4934) reopened by
- Still not working. Same error as before
- 23:00 Ticket #1739 (Services deasigned at restart oscam) updated by
- rev 4952 ok
- 22:59 Ticket #1739 (Services deasigned at restart oscam) closed by
- fixed
- 22:38 Ticket #1743 (oscam dont work on DM500 after version 4934) closed by
- fixed: Should be fixed in r4953 as I replaced strptime there.
- 21:43 Changeset [4953] by
- Replace strptime() through own parsing code as strptime() makes …
- 21:41 Ticket #1750 (Memory Leak in reader-nagra.c) closed by
- fixed: Thanks for that. I added this to revision [4952]
- 21:41 Changeset [4952] by
- fixed memory leak in nagra reader ticket #1750
- 20:20 Ticket #1754 (OSCAM and DM 500s) closed by
- duplicate
- 20:19 Ticket #1754 (OSCAM and DM 500s) created by
- Oscam version 4934 and latest not workin for DM 500s..…
- 18:17 Ticket #1753 (Compile Warnings) closed by
- invalid: can you read? •not open tickets for compiler WARNINGS
- 17:57 Ticket #1753 (Compile Warnings) created by
- = Revision <4951> Hallo, Mit dem Kompilieren einer i686, tretten …
- 17:45 Ticket #1752 (Oscam don't start on PPC (dbox2) @ Build 4947 & later) updated by
- would you please so kind and have at least a look in ticket #1743?
- 17:33 Ticket #1752 (Oscam don't start on PPC (dbox2) @ Build 4947 & later) updated by
- Not really a dupe, 4934 - 4946 works without any Problem here
- 17:14 Ticket #1752 (Oscam don't start on PPC (dbox2) @ Build 4947 & later) closed by
- duplicate: #1743
- 16:54 Ticket #1752 (Oscam don't start on PPC (dbox2) @ Build 4947 & later) created by
- = Revision <4947 & higher> = Issue Description <OScam don't Start> = …
- 16:44 Ticket #1751 (Crash on proxy restart) updated by
-
Owner changed
- 16:19 Ticket #1751 (Crash on proxy restart) created by
- = Revision r4951 = Issue Description Oscam crash when restart an …
- 13:48 Ticket #1749 (oscam crash when open connection to clients) updated by
- 4951 crash again when open connection to client
- 12:52 Ticket #1750 (Memory Leak in reader-nagra.c) created by
- = Revision 4904 = Issue Description Memory Leak = When the issue …
- 11:45 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
-
Priority changed
- 11:37 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- Same problem here with DM500. ./oscam: /lib/libc.so.6: version …
- 10:24 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
-
Owner, Priority changed
Same problem with DM500 - 09:32 Ticket #1729 (The CCcam client not working) updated by
- The requested configuration added…
- 09:27 Ticket #1749 (oscam crash when open connection to clients) updated by
- can confirm this, at least last good version is 4946 maybe 4947 works …
- 09:21 Changeset [4951] by
- fixed new thread cleanup management
- 08:19 Ticket #1749 (oscam crash when open connection to clients) updated by
-
Summary changed
- 08:14 Ticket #1749 (oscam crash when open connection to clients) created by
- = Revision 4949 - 4950 linux x86 = Issue Description crash when oscam …
- 08:02 Changeset [4950] by
- Fixed small typo for parameter 'ident' in 'oscam.server'.
- 01:02 Ticket #1740 (webif user CW Rate) closed by
- fixed
- 00:51 Ticket #1748 (From svn4935 OSCam does not start) closed by
- fixed: I think there's an error in you message: "/lib/ibc.so.6" should be …
- 00:29 Ticket #1748 (From svn4935 OSCam does not start) created by
- = Revision svn #4935 = Issue Description From svn4935 OSCam does not …
- 00:05 Changeset [4949] by
- Remove cleanup_thread from cs_exit as it causes segfaults
04/06/11:
- 23:59 Ticket #1740 (webif user CW Rate) updated by
- Seems like 4945 fixed it. User DB reinit doesn't trigger it anymore, …
- 23:55 Ticket #1747 (Reader extension "Get IP from client") updated by
- I suggest use prefix symbol before client_name in address. Eg. $ , ! , …
- 23:49 Ticket #1747 (Reader extension "Get IP from client") created by
- = Reason for enhancement Sometimes routers didn't update DDNS server …
- 23:28 Changeset [4948] by
- loadbalancer option to control early or late reopening of blocker readers
- 23:26 Changeset [4947] by
- Implement a safer thread cleanup mechanism: Client and reader threads …
- 23:10 Ticket #1746 ([Patch] Fix CSS, remove non-existant font-color property) closed by
- invalid: color is implemented since css1.0 as text color and not deprecated. …
- 22:30 Ticket #1746 ([Patch] Fix CSS, remove non-existant font-color property) created by
- = Revision 4946 = Issue There's no font-color property in CSS. = …
- 20:51 Changeset [4946] by
- WebIf: link cccam number cards to entitlement of this reader
- 20:41 Changeset [4945] by
- Fix wrong cw rate shown after user reinit. Futhermore, remove some …
- 20:36 Ticket #1644 (webif "Kill client" make oscam crash) updated by
- Problem is still here with #4934 even with config keepalive = 0 etc, I …
- 19:54 Ticket #1745 (Coolstream: Timeshift Buffer underrun under OScam DVBapi (coolapi)) created by
- = SVN < 4944 = Issue Description Timeshift Buffer underrun with …
- 19:33 Changeset [4944] by
- WebIf: Statustemplate - assign own class for each column. So it's …
- 18:11 Changeset [4943] by
- added check to avoid segfaults if compiled without a protocol, but used
- 17:53 Ticket #1744 (Show number of hops for CCCam readers on status page) created by
- = Reason for enhancement Fast view of hops of all readers = Possible …
- 17:40 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- same issue on dm500s with sifteam 1.9.4c Regards
- 17:28 Changeset [4942] by
- loadbalancer: thanks to stesu for another idea to block timeout readers
- 15:00 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- i dont know since when, but emm update in camd35 protcoll is also …
- 14:42 Changeset [4941] by
- loadbalancer: added another method for blocking non-responding readers
- 14:20 Ticket #1743 (oscam dont work on DM500 after version 4934) created by
- = Revision <all>4934> = Issue Description <oscam gives error …
- 13:47 Changeset [4940] by
- loadbalancer: better blocking of non-responding readers (camd35 udp, …
- 13:11 Ticket #1742 (double height rows in webif) closed by
- wontfix: and what fixed length should we set it? to fit your 19" monitor with …
- 12:19 Ticket #1742 (double height rows in webif) reopened by
- it should have a option to set the length or to set it to autosize. …
- 11:46 Ticket #1742 (double height rows in webif) closed by
- invalid: what do you think the web-if should do with very long lines? use a …
- 11:27 Ticket #1742 (double height rows in webif) updated by
- I have the exact same problem. In my case it happens when the Current …
- 11:12 Ticket #1742 (double height rows in webif) reopened by
- the problem show up when the text become tooo long for example "by …
- 11:05 Ticket #1742 (double height rows in webif) closed by
- wontfix: Noprob on 19" Screen
- 10:56 Changeset [4939] by
- memleak fixed in protocol_t1
- 10:43 Ticket #821 (entitlement date for irdeto 0604 (NLD, Ziggo) not correct) updated by
- Hi, any development on this issue? I have the same problem... As far …
- 10:02 Ticket #1741 (Compile error) closed by
- fixed: 4937 please test it , if still any problem ,reopen the ticket thanks
- 09:38 Changeset [4938] by
- reverted protocol_t1 changes
- 09:11 Changeset [4937] by
- fixed memleak in protocol-t1, fixed compile error in oscam-http, added …
- 08:29 Ticket #1742 (double height rows in webif) created by
- = Revision 4921 = Issue Description after added cards count in status …
- 08:05 Changeset [4936] by
- Added documentation for global, UDP and TCP camd3 suppresscmd08 option.
- 07:01 Ticket #1741 (Compile error) created by
- /home/freetz/oscam-svn/oscam-http.c: In function 'http_srv': …
- 05:25 Ticket #1740 (webif user CW Rate) updated by
- User DB reinit triggers it always it seems. Four out of four times …
- 03:49 Ticket #1740 (webif user CW Rate) updated by
- The firstlogin time is only set once for each account in oscam.c …
- 03:38 Changeset [4935] by
- If the current system time is smaller than (build date - 1 day), OSCam …
- 03:29 Ticket #1740 (webif user CW Rate) updated by
- yes, i know this so i was testing for over an hour (after restarting …
- 02:31 Ticket #1740 (webif user CW Rate) updated by
- The first number is (time_from_first_login_ever_of_this_account - …
- 02:22 Ticket #1700 (patch module-gbox) updated by
- This version seems to be outdated, a newer version is available in UMP …
- 01:47 Ticket #1740 (webif user CW Rate) updated by
- this is happening to me too. right now for example: 407525.56 (407525.56)
- 00:14 Changeset [4934] by
- Add speaking error messages using strerror() to all errors containing …
- 00:09 Ticket #1739 (Services deasigned at restart oscam) updated by
- when i touch the period key i got parkinson :D :))
- 00:06 Ticket #1739 (Services deasigned at restart oscam) updated by
- :)) sorry for my english ... i'll try to be more specific: my …
04/05/11:
- 23:53 Ticket #1729 (The CCcam client not working) updated by
- can you PLEASE answere the questions schlocke asked 4 posts above???? …
- 23:51 Ticket #1729 (The CCcam client not working) reopened by
- Sorry! The error occurs after restarting OSCam ... If they do not …
- 23:30 Ticket #1695 (Not more then 15 clientsessions possible & pipe errors) updated by
- Try to raise the ulimit of your system (especially if you're running …
- 23:26 Ticket #1739 (Services deasigned at restart oscam) updated by
- Please explain your issue again in full, understandable sentences and …
- 23:09 Ticket #1739 (Services deasigned at restart oscam) updated by
- rev 4933 did not fix services :(
- 22:52 Ticket #1693 ([PATCH] Webif dont't save Newcamd Protocol Name in Config) closed by
- fixed
- 22:52 Ticket #1693 ([PATCH] Webif dont't save Newcamd Protocol Name in Config) updated by
- Fixed in newer Build's
- 22:27 Ticket #1683 (ASCII Serial not correct on ORF-ICE Card) updated by
- It could well be that the printed one is intended to be totally …
- 22:20 Ticket #1693 ([PATCH] Webif dont't save Newcamd Protocol Name in Config) updated by
- Please report if this is still an issue with current revisions and if …
- 22:15 Ticket #1642 (If AU Line is blank by editing an User with Webif than in Status is AU ...) closed by
- fixed: This was fixed by alno some time ago.
- 22:12 Ticket #1613 (socket creation failed (erno=93) on kathrein 912 (with e2) with more ...) closed by
- wontfix: This is not an OSCam fault. No network available = No OSCam start. …
- 22:07 Changeset [4933] by
- WebIf: fix possible memleak in services parsing
- 22:00 Ticket #1729 (The CCcam client not working) closed by
- invalid: please answer the questions first and post your config. I can not …
- 21:50 Changeset [4932] by
- Config: fix small issue with default value in account suppresscmd08
- 21:45 Changeset [4931] by
- WebIf: increase size of services string from 512 Bytes to 1024 Bytes …
- 21:36 Changeset [4930] by
- split cmad08 in 3 parts: 1) tcp 2) udp 3) global (all clients) syntax …
- 20:47 Ticket #1740 (webif user CW Rate) updated by
- Could it be that on startup of OSCam, the time of your receiver isn't …
- 15:57 Changeset [4929] by
- write "suppresscmd08" (TCP) to config file
- 15:36 Ticket #1739 (Services deasigned at restart oscam) updated by
- ubuntu server 10.10 x86
- 13:12 Changeset [4928] by
- Update doc for 'suppresscmd08' enable/disable mismatch.
- 10:47 Ticket #1729 (The CCcam client not working) reopened by
- 4857 the last working version. If a service menu to "srvid" is empty, …
- 10:35 Ticket #1649 (webif - disabling and re-enabling a reader deletes AES keys) updated by
-
Severity changed
Today have lost my AES keys one more time. Raised the severity to high … - 10:24 Ticket #1634 (The cccmaxhops loop story.) closed by
- fixed: Closing. Last versions are OK.
- 10:05 Ticket #21 (oscam.cert to oscam.server) updated by
- you are right admin also i might change it to won't fix... (though …
- 09:01 Ticket #1740 (webif user CW Rate) created by
- = Revision 4907 --> 4927 = Issue Description value CW Rate appear …
- 08:35 Changeset [4927] by
- Added 'suppresscmd08' in txt documentation for camd3 3.5 TCP cs378x, too.
- 08:34 Changeset [4926] by
- Added 'suppresscmd08' in documentation for camd3 3.5 TCP cs378x, too.
- 08:28 Changeset [4925] by
- Documentation update for DVB API parameter 'ignore' and 'priority'.
- 08:14 Changeset [4924] by
- Config reading suppresscamd08 in camd35 tcp config
- 08:06 Changeset [4923] by
- Small documentation updates again.
- 08:05 Changeset [4922] by
- Small documentation updates.
- 07:59 Changeset [4921] by
- WebIf: re-implement suppresscamd08 in camd35 TCP section
- 00:11 Ticket #1654 (Unable initialize TNTSAT 4 card) closed by
- wontfix: log file is damaged please reupload the log and reopen it , if still exist
- 00:06 Ticket #1376 (Strange Viaccess behavior) closed by
- invalid
- 00:05 Ticket #1239 (Protocol_T0_ExchangeTPDU: Received unexpected character C0 ...) updated by
- no update for 5 months in this ticket ,also there are many change …
- 00:03 Ticket #829 (wishlist: fallback timeout for every reader or CAID) closed by
- invalid
Note:
See TracTimeline
for information about the timeline view.