Timeline
04/13/11:
- 23:30 Changeset [4995] by
- WebIf: cccam blockwise entitlement 2nd try
- 23:19 Changeset [4994] by
- I noticed that monitor encryption is not working on 64bit plattforms …
- 23:03 Changeset [4993] by
- small typo fix
- 22:58 Changeset [4992] by
- WebIf: first try: cccam entitlements blockwise output (untested)
- 22:55 Ticket #1782 (100%CPU after start 4983 and newest) closed by
- fixed: It's because LB loads the stats. clear stats and it will start up fast.
- 22:50 Ticket #1779 (jsc irdeto2 +oscam) updated by
- Replying to landlord: WHY CLOSED???
- 22:48 Changeset [4991] by
- cccam: another fix for minimizecards=2 with resharemode=3 …
- 22:39 Changeset [4990] by
- fix bug in srvid parsing
- 22:35 Changeset [4989] by
- limit blocknano/savenano from 0x80 to 0x8f; camd33: remove a global …
- 22:31 Ticket #1776 (CCCam share lost!) updated by
- 1. activate loadbalancer to reduce ecm traffic 2. set oscam.conf …
- 22:12 Changeset [4988] by
- cccam: prepared entitlements for page switch/alno
- 22:01 Ticket #1782 (100%CPU after start 4983 and newest) created by
- = Revision 4983 and newest = Issue Description When start oscam CPU …
- 19:55 Ticket #1779 (jsc irdeto2 +oscam) closed by
- invalid
- 19:54 Ticket #1777 (newcamd/ccc-cascading problem - newcamd leaks internal amount of cards) closed by
- invalid: Please use the forum for discussion.
- 19:46 Changeset [4987] by
- WebIf: dropdown for AC penalty. @Schlocke: please check the …
- 19:31 Ticket #1781 (Ocasional crash on switch channel) created by
- = Revision 4983 = Issue Description When change channel ocasionally …
- 19:22 Ticket #1780 (091f provider doens't work anymore on oscam?) created by
- = Revision all = Issue Description they started to update soft to …
- 19:04 Ticket #1777 (newcamd/ccc-cascading problem - newcamd leaks internal amount of cards) reopened by
- You don´t see my point for newcamd/newcamd! In a master/proxy …
- 18:48 Changeset [4986] by
- cccam: bad sids from remote peer are no longer removed
- 18:47 Changeset [4985] by
- loadbalancer: speed up access by moving mru stats to top of list
- 18:45 Ticket #1775 (Show all entitlments make oscam to crash) updated by
- yes i was make more test! With about 400 card it not crash! But with …
- 18:33 Ticket #1776 (CCCam share lost!) updated by
- i was attached the log. but as you see nothing is show up there! Just …
- 18:30 Ticket #1770 (oscam crash when you save reader in webif) updated by
- Ok version 4971 to 4984 when disable reader oscam crash
- 18:29 Ticket #1756 (save reader by webif) updated by
- same 4984
- 18:27 Ticket #1770 (oscam crash when you save reader in webif) updated by
- Ok version 4984 when disable reader oscam crash version 4853 when …
- 18:25 Ticket #1779 (jsc irdeto2 +oscam) created by
- = Issue Description <I cannot start my card? the program doesn't …
- 18:07 Ticket #1777 (newcamd/ccc-cascading problem - newcamd leaks internal amount of cards) closed by
- wontfix: If you define caid/ident or services on your reader, oscam generates …
- 17:47 Ticket #1778 (TOTAL TV a big problem) closed by
- invalid: Ticket is Trash.
- 17:39 Ticket #1778 (TOTAL TV a big problem) created by
- '= Revision <Please fill in> = Issue Description <Please fill …
- 16:52 Ticket #1770 (oscam crash when you save reader in webif) updated by
- are you able to disable/enable readers from reader menu without crash? …
- 16:30 Ticket #1770 (oscam crash when you save reader in webif) updated by
- hello i have change label by server_dyndns_org same problem i give …
- 16:14 Ticket #1776 (CCCam share lost!) updated by
- anyway if it's not config problem , without debug log nobody couldn't …
- 14:23 Changeset [4984] by
- dvbapi: filter ecm by length
- 13:42 Ticket #1777 (newcamd/ccc-cascading problem - newcamd leaks internal amount of cards) created by
- I found in actual trunk a cascading problem/newcamd-Export "bug": The …
- 12:43 Ticket #1775 (Show all entitlments make oscam to crash) updated by
- For me, OSCam 4981 don't crashs with 11 CCcam remote readers, but I …
- 12:34 Ticket #1776 (CCCam share lost!) reopened by
- Well is not a config issue since with rev 4945 there is NO problem! …
- 11:50 Ticket #1776 (CCCam share lost!) closed by
- worksforme: sorry, this is works for me without any problem , seems u have some …
- 11:31 Ticket #1775 (Show all entitlments make oscam to crash) updated by
-
Owner changed
- 11:06 Ticket #1775 (Show all entitlments make oscam to crash) updated by
- can you do more testing with - e.g. only one, two, etc. cccam …
- 11:01 Ticket #1775 (Show all entitlments make oscam to crash) updated by
-
Owner, Priority, Component changed
- 10:52 Changeset [4983] by
- reduce srvid memory usage
- 10:15 Ticket #1767 (Restart from webif not work) updated by
- It not works after rev. 4946. 4946 is the last working for me!
- 10:07 Ticket #1776 (CCCam share lost!) created by
- = Revision 4981 = Issue Description Sometimes after watching channel …
- 10:01 Ticket #1775 (Show all entitlments make oscam to crash) created by
- = Revision 4981 = Issue Description When i want to show all …
- 09:54 Ticket #1767 (Restart from webif not work) updated by
-
Priority, Sensitive, Component changed
- 03:02 Ticket #1680 (WebInf: wrong Label on Monitorclients) closed by
- fixed: Fixed in [4982].
- 03:01 Changeset [4982] by
- Fix #1680, thanks to blaky for the good analysis. Furthermore, …
04/12/11:
- 14:53 Ticket #1774 (request to add active client in webif oscam) closed by
- invalid: ????
- 14:24 Ticket #1774 (request to add active client in webif oscam) created by
- = Reason for enhancement <request do add the active client page on …
- 13:19 Ticket #1770 (oscam crash when you save reader in webif) updated by
- just an idea - you already have tried to use an other label for reader …
- 12:31 Ticket #1654 (Unable initialize TNTSAT 4 card) closed by
- fixed: 4830 , please test and reopen with latest rev log. tnx
- 12:27 Ticket #1654 (Unable initialize TNTSAT 4 card) updated by
- 12:23 crosscompiling edited by
- (diff)
- 12:00 Ticket #1756 (save reader by webif) updated by
- same in 4981
- 12:00 Ticket #1770 (oscam crash when you save reader in webif) updated by
- same problem in 4981
- 10:34 Ticket #1773 (Suggestion for WebIF) closed by
- wontfix
- 10:32 Ticket #1773 (Suggestion for WebIF) updated by
- - newcamd and camd readers havn't entitlements. Where entitlements are …
- 10:04 Ticket #1773 (Suggestion for WebIF) created by
- = Reason for enhancement Currently the webIF is usable but not so easy …
- 09:47 Ticket #1767 (Restart from webif not work) updated by
- to me also not work with head revision :(
- 09:36 Ticket #1769 (Anticascading rev 4965) updated by
- Please test head and give feedback
- 08:03 Changeset [4981] by
- fixed compileerror when compiled without AC
- 03:02 Ticket #1767 (Restart from webif not work) updated by
- No success with 4978.
- 02:30 Changeset [4980] by
- If memory allocation failed in mk_t-functions, an empty constant …
- 01:29 Changeset [4979] by
- Use a function for building ip ranges in order to remove duplicate …
- 00:27 Ticket #1653 (Unable to configure correct RSA + Boxkey for some Irdeto2 cards using WebIF) updated by
- I'm wondering if this actually does work when you enter it manually in …
04/11/11:
- 23:43 Changeset [4978] by
- saving stats on exit without a thread, should solve webif restart problem
- 23:09 Changeset [4977] by
- first try to reactivate the anticascader
- 22:43 Ticket #1767 (Restart from webif not work) updated by
- same issue here, on my mipsel dreamboxes. on 4946, this was ok, last …
- 20:15 Ticket #1772 ([REGRESSION] No sound with dvbapi) closed by
- fixed: [4976]
- 20:14 Ticket #1772 ([REGRESSION] No sound with dvbapi) reopened by
- 19:50 Ticket #1772 ([REGRESSION] No sound with dvbapi) closed by
- invalid: Bad Ticket quality. No dvbapi debuglog etc
- 19:49 Changeset [4976] by
- dvbapi: fix typo from r4972
- 19:44 Ticket #1772 ([REGRESSION] No sound with dvbapi) updated by
- FTA channels have sound, encrypted channels don't. Hardware is …
- 19:41 Ticket #1772 ([REGRESSION] No sound with dvbapi) created by
- = Revision 4972 = Issue Description No sound = When the issue occurs …
- 19:35 Changeset [4975] by
- Config: save reader 'enable' parameter only when zero (default is 1)
- 19:29 Changeset [4974] by
- Config: don't save frequencies to conf if readertype is smartreader
- 19:19 Changeset [4973] by
- WebIf: correct reader stats template
- 17:05 Changeset [4972] by
- dvbapi: fix possible buffer overflow
- 16:21 Ticket #1770 (oscam crash when you save reader in webif) updated by
- i remove all cccam server and when i add 1 server to my config and …
- 16:18 Ticket #1770 (oscam crash when you save reader in webif) reopened by
- 16:18 Ticket #1770 (oscam crash when you save reader in webif) updated by
- no problem on my config oscam.server edit your oscam.server and save …
- 16:04 Ticket #1771 (Few minutes after starting oscam, Newcamd shares are not shown on a ...) reopened by
- 15:59 Ticket #1756 (save reader by webif) reopened by
- [reader] label = csat enable …
- 15:48 Ticket #1771 (Few minutes after starting oscam, Newcamd shares are not shown on a ...) closed by
- invalid: no log, no conf >> closed
- 15:44 Ticket #1771 (Few minutes after starting oscam, Newcamd shares are not shown on a ...) created by
- = Revision 4971 (maybe others) = Issue Description After starting …
- 15:29 Ticket #1770 (oscam crash when you save reader in webif) closed by
- invalid: still no config (no, x86 linux is the plattform, not a config). you …
- 14:23 Ticket #1654 (Unable initialize TNTSAT 4 card) reopened by
- thanks to admin , he recovered some lost logs Regards
- 10:31 Ticket #1770 (oscam crash when you save reader in webif) updated by
- 2011/04/11 10:30:19 B770DB70 r IFD Transmit: 2011/04/11 10:30:19 …
- 10:24 Ticket #1770 (oscam crash when you save reader in webif) reopened by
- Ok Reader : cccam config : x86 linux no log possible crash without reason
- 10:07 Ticket #1770 (oscam crash when you save reader in webif) closed by
- invalid: Less information about kind of reader, protocol configs and so on. …
- 09:55 Ticket #1770 (oscam crash when you save reader in webif) created by
- = Revision 4971 = Issue Description When you save edit reader and …
- 09:50 Ticket #1595 (Timeouts on version 4630 and after this version) updated by
- Does the problem persist? Tested with newest oscam? If you disable the …
- 06:41 Ticket #1440 (timeout when perfer local set to On with newcamd protocol as a proxy) updated by
- Another thing, camd35 readers worked fine when i disabled newcamd …
- 05:36 Ticket #1440 (timeout when perfer local set to On with newcamd protocol as a proxy) reopened by
- 05:36 Ticket #1440 (timeout when perfer local set to On with newcamd protocol as a proxy) updated by
- Hi, I have same problem with 3 newcamd and 2 camd35 Irdeto (nova/art) …
- 00:14 Ticket #1767 (Restart from webif not work) reopened by
- 00:10 Ticket #1767 (Restart from webif not work) updated by
- The log doesn't show anything, but attached above. I noticed it also …
04/10/11:
- 21:38 Ticket #1767 (Restart from webif not work) closed by
- invalid: no log => closed…
- 21:36 Ticket #1751 (Crash on proxy restart) closed by
- invalid: use the information posted here …
- 21:33 Ticket #1747 (Reader extension "Get IP from client") closed by
- wontfix: if dyndns is not working, fix that and not try to make oscam work …
- 21:20 Changeset [4971] by
- Added new default values for 'cccignorereshare', 'cccreshare' and …
- 21:16 Ticket #1726 (Crash on nmap scan) closed by
- wontfix: if it is not reproducable, it can´t be fixed. gdb without debug is …
- 21:13 Ticket #1714 (cccmaxhops for single caid.) closed by
- invalid: please discuss here …
- 21:09 Ticket #1734 (Oscam not read the Nagra 3 card) updated by
-
Summary changed
- 20:53 Ticket #1664 (OSCAM is trying get ECM from a Proxie with UNKNOWN Status.) closed by
- fixed: not sure which rev. but there were some changes in the last weeks …
- 20:40 Ticket #1640 (cccam reader and time connecting) closed by
- invalid: please discuss this here: …
- 20:18 Ticket #1563 (Error at starting newer Build on MacOS X) closed by
- fixed: build issues were fixed a few weeks ago, reporter did not report that …
- 20:14 Ticket #1498 (Random crashes at startup with multiple smargo's) closed by
- invalid: please use the information posted here …
- 20:11 Ticket #1440 (timeout when perfer local set to On with newcamd protocol as a proxy) closed by
- fixed: no update since 2 months - closed…
- 20:05 Ticket #1361 (blocknano is not working for irdeto/betacrypt(tunneled nagra) cards) updated by
- can you provide a patch that covers all card types?
- 20:04 Ticket #1335 (Duplicate,multiply users! Oscam disconnects and gets Instable when the ...) closed by
- fixed: not sure which rev, but schlocke committed many changes for duplícate …
- 19:59 Ticket #1318 (adaptions for usage on relook400s neumo-3.4.x) updated by
- as this could break other systems - what boxtype do you use for this …
- 19:56 Ticket #1280 (Does not start when tuner in standby on dreambox 7025) closed by
- fixed: please try with latest version and report if problem still exist.
- 19:53 Ticket #1256 (inactivitytimeout count incorrectly) closed by
- fixed: please test with latest version and if not, try to discuss this in …
- 19:48 Ticket #1169 (dvbapi does no shared emm updates) closed by
- fixed: no update since 3 month´s => closed again…
- 19:40 Ticket #1394 (Entitlements should be cleared on pcsc card removal) updated by
- Does the reader show the proper status on the status page when the …
- 19:25 Changeset [4970] by
- Remove clientdyndns from docu as it was removed in r4459
- 19:12 Ticket #1064 (block nano for provider 0664 to avoid paired card blocking) closed by
- fixed: This can normally be done by blocknano. As there's no answer to my …
- 19:07 Ticket #1367 (Oscam exits with signal 15 when changing to an unsubscribed Channel - ...) closed by
- fixed: No answer for 6 weeks => closed. If you still experience this problem, …
- 19:03 Ticket #1301 (EMM Problem with seca cards.) updated by
- Please report if this is still an issue and if so provide detailed logs.
- 19:00 Ticket #1409 (Simulcrypt problems seca2/3 On all dutch canaldigitaal SD channels) updated by
- Is this still an issue? Schlocke did lots of improvements to CCCam …
- 18:23 Ticket #1644 (webif "Kill client" make oscam crash) updated by
- We improved the thread cleanup mechanism recently. It should be fixed …
- 18:18 Ticket #978 (failed to read UM01/UM02/UM03 Smartcards in DB7025+ internal SC-Reader) closed by
- fixed: If I understood your last attachment correct, it works if you don't …
- 18:12 Ticket #1721 (ERROR reading from fd 1058) updated by
- We recently changed thread cleanup so this is probably fixed now. …
- 18:09 Ticket #1743 (oscam dont work on DM500 after version 4934) closed by
- fixed
- 17:55 Ticket #1695 (Not more then 15 clientsessions possible & pipe errors) updated by
- Did you get this fixed? There are a lot of others using OSCam with way …
- 17:49 Ticket #1620 (Web interface not working on ddwrt ./oscam: can't resolve symbol 'remove') updated by
-
Priority, Severity changed
- 17:49 Ticket #1620 (Web interface not working on ddwrt ./oscam: can't resolve symbol 'remove') updated by
- We had a quite similar issue previously also with dm500/dbox2: The …
- 17:42 Ticket #1729 (The CCcam client not working) reopened by
- 17:35 Ticket #1729 (The CCcam client not working) updated by
- This issue has not changed ... minimize_card=2 error minimize_card=0 …
- 17:27 Ticket #1758 (Definitions in globals.h, it's wrong!) closed by
- wontfix: whenever u make some patch u could upload it in a forum or here thanks,
- 17:26 Ticket #970 (/tmp/.pauseoscam does not work, and oscam stop running when reciver ...) closed by
- fixed: This was fixed some time ago in at least r4540 (probably even …
- 17:17 Ticket #1737 (Errors while compiling OScam revisions after 4803 on Solaris x86) updated by
- Can you provide a patch for Solaris based on the code you linked?
- 17:15 Ticket #1632 (AU/EMM not working anymore on new builds) closed by
- worksforme: Please note that the configuration parameter au in the user section …
- 17:07 Ticket #1761 (Oscam 4951 x86 64bit crash) updated by
- Sorry but the information given in this ticket is absolutely without …
- 17:04 Ticket #1764 (*** glibc detected *** ./oscam.x86: corrupted double-linked list: ...) updated by
- Can you reproduce this error or did it only happen once? If so, please …
- 17:01 Ticket #1291 (OSCam Crash on Nagra Card Init (SSL Active)) closed by
- fixed: No answer for three months and 1000 revisions later I think this can …
- 16:55 Ticket #1762 (ECM response time after 4963) closed by
- fixed: Fixed With 4967
- 16:54 Ticket #1763 (High CPU Load (100%) with >#4965) closed by
- fixed: Seems to me like the difference is below measurable. I'll close this …
- 15:59 Ticket #1769 (Anticascading rev 4965) created by
- the ac doesnt work with rev 4965. there is no entry in ac.log only …
- 15:53 Ticket #1763 (High CPU Load (100%) with >#4965) updated by
- Here TOP from 4963 Mem: 28136K used, 33844K free, 0K shrd, 2816K …
- 15:26 Ticket #1763 (High CPU Load (100%) with >#4965) updated by
- CPU load is maybe the same like 4963 here ist top for 5 minutes runing …
- 14:46 Ticket #1763 (High CPU Load (100%) with >#4965) updated by
- Previously, it could happen that garbage was added twice to the …
- 14:41 Ticket #1763 (High CPU Load (100%) with >#4965) updated by
- Works well on my dm600 with latest #4969. Good work Admin!
- 14:22 Ticket #1729 (The CCcam client not working) closed by
- fixed: fixed with 4969. please test.
- 14:18 Ticket #1763 (High CPU Load (100%) with >#4965) updated by
- Yes its much better for me now with 4969, much lower cpu usage from …
- 14:03 Changeset [4969] by
- cam: fixed resharemode=3 with minimizecards=2 cccam: added cccstealth …
- 13:35 crosscompiling edited by
- Example -> for compile DM8000 Mipsel binary on x86 Linux system (diff)
- 13:33 Ticket #1763 (High CPU Load (100%) with >#4965) updated by
- I did a commit with a lower hash_buckets size now than in the original …
- 13:21 Changeset [4968] by
- Most of the time, only one iterator is needed at the same time. To …
- 12:02 Ticket #1768 (/oscam-garbage.c:35: warning: cast from pointer to integer of ...) closed by
- invalid
- 12:02 Ticket #1768 (/oscam-garbage.c:35: warning: cast from pointer to integer of ...) updated by
- learn reading!!! • not open tickets for compiler WARNINGS
- 11:15 Ticket #1768 (/oscam-garbage.c:35: warning: cast from pointer to integer of ...) created by
- = Revision <4967> = Issue Description <warning> = When the issue …
- 11:09 Ticket #1766 (Changes introduced in 4963 generates very high CPU usage) closed by
- duplicate: Please look for other tickets before opeing new ones.
- 11:08 Changeset [4967] by
- Add garbage to multiple lists to fix high cpu usage on cccam since …
- 10:57 Ticket #1763 (High CPU Load (100%) with >#4965) updated by
- On my dm600 cpu was very high for builds after #4963. I tested this …
- 10:24 Ticket #1767 (Restart from webif not work) updated by
- The problems only occurs on my dm500hd stb. Oscam on my linux box …
- 10:05 Ticket #1763 (High CPU Load (100%) with >#4965) updated by
- I tested the patch, it starts with higher cpu load then 4963 33% and …
- 09:29 Ticket #1767 (Restart from webif not work) updated by
- I can confirm this, been like this for some days for me now, but I did …
- 09:21 Ticket #1767 (Restart from webif not work) created by
- = Revision 4963-4966 mips tuxbox = Issue Description cant restart …
- 04:55 Ticket #1766 (Changes introduced in 4963 generates very high CPU usage) created by
- = Revision 4963 MY SYSTEM: Linux Ubuntu 10.04 = Issue Description …
- 03:02 Ticket #1756 (save reader by webif) closed by
- fixed: Should be fixed now in [4966].
- 03:00 Changeset [4966] by
- Correct parameter saving when httpsavefullcfg is set to 1
04/09/11:
- 23:40 Ticket #1765 (Error activating card/Card initializing error D09 KDG) updated by
- Replying to Deas: > try to start oscam in debug mode - …
- 23:33 Ticket #1765 (Error activating card/Card initializing error D09 KDG) updated by
- try to start oscam in debug mode - there is a similar ticket here for …
- 23:22 Ticket #1765 (Error activating card/Card initializing error D09 KDG) updated by
- Replying to pooyair: > u might mean after changeset 4811 …
- 22:41 Ticket #1765 (Error activating card/Card initializing error D09 KDG) updated by
- u might mean after changeset 4811 this problem occurred isn't it? so …
- 21:30 Ticket #1729 (The CCcam client not working) reopened by
- Ok, you are using reshare_mode=3 with minimize_card=2. This is a …
- 21:24 Ticket #1756 (save reader by webif) updated by
- It seems like you're using httpsavefullcfg=1, correct?
- 20:15 Ticket #1765 (Error activating card/Card initializing error D09 KDG) updated by
- Attached for reference and diagnosis please find oscam logfile …
- 20:07 Ticket #1729 (The CCcam client not working) closed by
- invalid: I use the old one (4857). That's good work. Thanks…
- 19:38 Ticket #1765 (Error activating card/Card initializing error D09 KDG) updated by
- Replying to BurnMasterRecords: > > {{{ > 2011/04/09 …
- 19:07 Ticket #1765 (Error activating card/Card initializing error D09 KDG) updated by
- […] You need Card Modulus and Pairing Key to get this Card working.
- 18:59 Ticket #1765 (Error activating card/Card initializing error D09 KDG) created by
- = Revision version=1.00-unstable_svn, build #4965, …
- 18:55 Ticket #1763 (High CPU Load (100%) with >#4965) updated by
- ARM dockstar with about 25 Proxys / Clients. I will try this later and …
- 17:12 Ticket #1762 (ECM response time after 4963) updated by
- Do you have high load (see #1763 and the patch there)? Do you compile …
- 16:34 Ticket #1763 (High CPU Load (100%) with >#4965) updated by
- Of which plattform and which amount of users/proxies do you speak?
- 16:17 Ticket #1764 (*** glibc detected *** ./oscam.x86: corrupted double-linked list: ...) created by
- hi server clearos 5.2 with oscam v4956 after time ???? is turn off …
- 15:13 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- Oscam 4965 work fine! thanks a lot.
- 12:33 Ticket #1763 (High CPU Load (100%) with >#4965) updated by
- No High CPU Load on x64 / arm / ppc / mips here
- 12:28 Ticket #1763 (High CPU Load (100%) with >#4965) created by
- = Revision >4965 = Issue Description 100% Cpu, 4963: normal behavior …
- 11:58 Ticket #1723 (caid 0664 problem) updated by
-
Summary changed
- 11:41 Ticket #1762 (ECM response time after 4963) created by
- = Revision <Please fill in> Tested with 4965 = Issue Description …
- 02:39 Changeset [4965] by
- Add a check to prevent double frees in garbage collector. It also …
- 01:25 Ticket #1743 (oscam dont work on DM500 after version 4934) updated by
- i have toolchain from openpli for DM500, may be will be useful
Note:
See TracTimeline
for information about the timeline view.