OSCam/en/examples/Sky HD and MTV-Unlimited

Aus Streamboard Wiki
Wechseln zu: Navigation, Suche

LanguageDE S.png OSCam Übersicht LanguageEN S.png OSCam Home LanguageFR S.png OSCam Accueil LanguageIT S.png OSCam Home

Sky GER HD, MTV-Unlimited, HD+ and TNTSAT

Basics

  • 1x serial Cardreader with Sky GER Nagra 3 S02 SC (6,00 Mhz) SD CAID 1702, HD CAID 1833, Ident 000000
  • 1x USB serial Cardreader with MTV-Unlimited Conax SC (3,57 Mhz) CAID 0B00, Ident 000000
  • 1x USB serial Cardreader with HD+ Nagravison SC (3,68 Mhz) CAID 1830, Ident 000000,003411,008011
  • 1x USB serial Cardreader with TNTSAT Viaccess SC (3,57 Mhz) CAID 0500, Ident 030B00,FFF400
  • protocol understood by many clients and STBs: newcamd

Configuration

oscam.conf

This is where we configure OScam for the newcamd protocol. We need the following values:

  • Choose a DES Key for newcamd protocol (14-byte value), e.g. 0102030405060708091011121314.
  • Choose a port for Sky SD CAID 1702, e.g. 12345.
  • Choose a port for MTV-Unlimited CAID 0B00, e.g. 23456.
  • Choose a port for HD+ CAID 1830, e.g. 34567.
  • Choose a port for TNTSAT CAID 0500, e.g. 45678.

Now we write the newcamd configuration, specifying for each port the CAID and Idents.

[global]
nice            = -1
logfile = /var/log/oscam.log usrfile = /var/log/oscamsuser.log
[newcamd] key = 0102030405060708091011121314 port = 12345@1702:000000,23456@0B00:000000;34567@1830:000000,003411,008011;45678@0500:030B00,FFF400

oscam.server

  • The frequencies for each card reader should be known.
  • We define a separate reader for each card, name must be unique.
  • Each reader is assigned a different group number.
  • For each reader we specify a caid, the idents, and a service name, to identify what card is stored in it.
[reader]
detect    = CD
device    = /dev/ttyS0
protocol  = mouse
label = reader0 emmcache = 1,3,2 caid = 1702 ident = 1702:000000 services = sky group = 0
[reader] detect = CD device = /dev/ttyUSB0 protocol = mouse
label = reader1 emmcache = 1,3,2 caid = 0B00 ident = 0B00:000000 services = mtv_unlimited group = 1
[reader] detect = CD device = /dev/ttyUSB1 protocol = mouse
rsakey = <Enter your RSA Key here> boxkey = <Enter your Box Key here> label = reader2 emmcache = 1,3,2 caid = 1830 ident = 1830:000000,003411,008011 services = hdp group = 2
[reader] detect = CD device = /dev/ttyUSB2 protocol = mouse
aeskeys = 0500@030B00:<Enter your AES Key here>,<Enter your AES Key here> label = reader3 emmcache = 1,3,2 caid = 0500 ident = 0500:030B00,FFF400 services = tntsat group = 3

oscam.user

  • Create for each receiver and each CAID its own accaount, associating it with the appropriate service and group.
  • All clients are configured for AutoUpdate. If it is not performed, the card validity is not extended.
  • Configure all Sky HD service IDs through betatunnel and map Sky HD CAID 1833 to Sky SD 1702. This way, the card will only receive requests for CAID 1702.
[account]
user       = skyuser1
pwd        = skypassword1
group      = 0
au         = reader0
betatunnel = 1833.007a:1702,1833.007b:1702,1833.007c:1702,1833.007e:1702,1833.007f:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084:1702
ident      = 1702:000000
caid       = 1702
services   = sky
[account] user = skyuser2 pwd = skypassword2 group = 0 au = reader0 betatunnel = 1833.007a:1702,1833.007b:1702,1833.007c:1702,1833.007e:1702,1833.007f:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084 ident = 1702:000000 caid = 1702 services = sky
[account] user = mtvuser1 pwd = mtvpassword1 group = 1 au = reader1 ident = 0B00:000000 caid = 0B00 services = mtv
[account] user = mtvuser2 pwd = mtvpassword2 group = 1 au = reader1 ident = 0B00:000000 caid = 0B00 services = mtv
[account] user = hdpuser1 pwd = hdppassword1 group = 2 au = reader2 ident = 1830:000000,003411,008011 caid = 1830 services = hdp
[account] user = hdpuser2 pwd = hdppassword2 group = 2 au = reader2 ident = 1830:000000,003411,008011 caid = 1830 services = hdp
[account] user = tntuser1 pwd = tntpassword1 group = 3 au = reader3 ident = 0500:030B00,FFF400 caid = 0500 services = tntsat
[account] user = tntuser2 pwd = tntpassword2 group = 3 au = reader3 ident = 0500:030B00,FFF400 caid = 0500 services = tntsat

You should avoid the abbreviation of the beta tunnel like so:

"Betatunnel = 1833.FFFF:1702"

If the clients are not 100% identical, then caching would be bypassed.

oscam.services

  • Definition of Services.
[mtv]
caid=0B00
provid=000000
srvid=6FEE,6FEF,6FF0,6FF1,6FF3,6FFA,6FFF
[sky] caid=1702 provid=000000 srvid=000C,000D,000E,000F,0010,0013,0015,0016,0017,0018,001A,001B,001C,001D,0022,0024,002A,0032,0034,00A8,0206,003C,003D,003E,003F,0040,0041,0042,0043,0044,07FF,2EFE,3331,3394,4461,4462,6FF1,7009,700A,0011,0035,00DD,00DE,00FD,0107,0111,011B,012F,0125,0139,0143,014D,016B,0175,006A,006B,006F,0070,0071,0072,0075,0077,0081,0082,0083,0084,00DF,00FC,0106,0110,011A,0124,012E,0138,0142,014C,0156,0160,0008,0009,0014,0019,0029,000A,000B,002B,0203,0204,0096,0097,0098,0099,009A,009B,009C
[hdp] caid=1830 provid=000000,003411,008011 srvid=EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77
[tntsat] caid=0500 provid=030B00,FFF400 srvid=1F41,1F44,1F48,1F4A,1FD8,200C,20A4,20B3,20B4,20B6,2261,2329,232A,23F7,2405,2407,240A,2458,245E,25E5,25E6,25E7,25E8,25E9,25EA,25EB,25EC,25ED,25EE,25EF,25F0,2649,264A,264B,264C,264D,264E,264F,2650,2651,2652,2653,2654,4284

Client connection with mgcamd

  • Both Sky SD CAID 1702 and Sky HD CAID 1833 are accessed through one connection.
  • No additional mapping is required on the client side.
  • The mgcamd client supports AutoUpdate.
  • Add these lines to newcamd.list:
CWS = 192.168.178.1 12345 skyuser1 skypassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server1
CWS = 192.168.178.1 23456 mtvuser1 mtvpassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server2
CWS = 192.168.178.1 34567 hdpuser1 hdppassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server3
CWS = 192.168.178.1 45678 tntuser1 tntpassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server4

Client connection with CCcam

  • Both Sky SD CAID 1702 and Sky HD CAID 1833 are accessed through one connection.
  • No additional mapping is required on the client side.
  • Add these lines to CCcam.cfg:
N: 192.168.178.1 12345 skyuser1 skypassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.178.1 23456 mtvuser1 mtvpassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.178.1 23456 hdpuser1 hdppassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.178.1 23456 tntuser1 tntpassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Client connection with OSCam DVB API

  • Yes, we are using OScam as a client!
  • Both Sky SD CAID 1702 and Sky HD CAID 1833 are accessed through one connection.
  • OSCam DVB API supports AutoUpdate.

oscam.conf

  • No logging.
  • DVB API defined with AU.
[global]
disablelog      = 1
disableuserfile = 1
[dvbapi] enabled = 1 au = 1 user = dummyuser

oscam.user

  • User defined with AU.
  • User is assigned to all groups.
  • Betatunnel must be specified on the client side.
[account]
user       = dummyuser
pwd        = dummypassword
betatunnel = 1833.007a:1702,1833.007b:1702,1833.007c:1702,1833.007e:1702,1833.007f:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084
group      = 0,1,2,3
au         = 1

oscam.server

  • Define a remote reader for each service.
  • We have EMM caching even on the client side.
  • Replace the IP address of the OSCam server on the device line to match your LAN configuration.
[reader]
label     = reader0
device    = 192.168.178.1,12345
protocol  = newcamd
user      = skyuser1
password  = skypassword1
key       = 0102030405060708091011121314
emmcache  = 1,3,2
caid      = 1702
ident     = 1702:000000
services  = sky
group     = 0
[reader] label = reader1 device = 192.168.178.1,23456 protocol = newcamd user = mtvuser1 password = mtvpassword1 key = 0102030405060708091011121314 emmcache = 1,3,2 caid = 0B00 ident = 0B00:000000 services = mtv group = 1
[reader] label = reader2 device = 192.168.178.1,34567 protocol = newcamd user = hdpuser1 password = hdppassword1 key = 0102030405060708091011121314 emmcache = 1,3,2 caid = 1830 ident = 1830:000000,003411,008011 services = hdp group = 2
[reader] label = reader3 device = 192.168.178.1,45678 protocol = newcamd user = tntuser1 password = tntpassword1 key = 0102030405060708091011121314 emmcache = 1,3,2 caid = 0500 ident = 0500:030B00,FFF400 services = tntsat group = 3

oscam.services

  • Copy from the server (see above).

Diese Seite in anderen Sprachen - This page in other languages - Cette page dans d'autres langues - Queste pagine in altre Lingue

LanguageDE S.png Deutsch LanguageEN S.png English LanguageFR S.png Français LanguageIT S.png Italiano